2.5mm Pitch Horizontal SMT Connector JUSHUO AFC25-S05DCA-00 Operating Temperature Range -25 to 105
Manufacturer:
JUSHUO
Description:
Connector Header 5 position 2.5mm Pitch 3A Surface Mount, Right Angle -20℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
8.3mm
Reference Series:
XH
Pins Structure:
1x5P
Contact Plating:
锡
Contact Material:
黄铜;LCP
Operating Temperature:
-20℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
2.5mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
5
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
15mm
Z-Height Of The Board:
6.11mm
Mounting Type:
卧贴
Row Spacing:
-
Mfr. Part #:
AFC25-S05DCA-00
Package:
SMD,P=2.5mm,Surface Mount,Right Angle
Model Number:
AFC25-S05DCA-00
Introduction
Product Overview
The AFC25-S**DCA-00 is a 2.5mm pitch horizontal SMT connector designed for various applications. It offers reliable electrical and mechanical performance, adhering to environmental protection standards.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: China
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specification | Details |
| Product Name | 2.5mm Horizontal SMT Connector | AFC25-S**DCA-00 |
| Rated Voltage | 250V AC/DC | |
| Rated Current | 3.0A | |
| Operating Temperature Range | -25+105 | |
| Operating Humidity Range | Below 90% RH | |
| Packing | Inner packing: joint and several, Outer packing: carton. Sealed and secured within the box. | |
| Transport Environment Temperature | -20 to +50 | |
| Storage Environment | Temperature: -20+50, Relative Humidity: 90%, free from acidic, alkaline, and corrosive gases. | |
| Part Name/Material | Base | LCP E130i |
| Part Name/Material | Pin | Brass |
| Part Name/Material | Stator | Brass |
| Appearance | Plastic parts: free from scars, mottling, cracks, burrs, flash, material deficiency, and deformation. Metal parts: smooth, free from rust, oxidation, peeling, blackening, and mechanical damage. | |
| Contact Resistance | Max 20m | After mating |
| Insulation Resistance | Min 1000M | Applied 1000V DC for 1 minute between adjacent contacts and between contacts and enclosure. |
| Withstand Voltage | No breakdown and flashover | Applied 1000V AC for 1 minute between adjacent contacts and between contacts and enclosure. |
| Heating Test | Appearance: No damage; Contact Resistance: Max 30m | 96H at +1052, then 1-2H recovery. |
| Cold Tolerance Test | Appearance: No damage; Contact Resistance: Max 30m | 96H at -252, then 1-2H recovery. |
| Moisture Resistance Test | Appearance: No damage; Insulation Resistance: Min 500M; Withstand Voltage: Min 800V AC/min | 96H at 402, 90-96% RH, then 1-2H recovery. |
| Temperature Cycle Test | Appearance: No abnormality; Contact Resistance: Max 30m | 5 cycles of -253 (30min), Room Temp (1H), +1053 (30min), Room Temp (1H), then 2H recovery. |
| Salt Spray Test | Appearance: No damage or corrosion; Contact Resistance: Max 30m | 24H continuous spray with 51% NaCl solution, followed by washing and 1-2H recovery. |
| Weldability | Tin area: 95% | Dipped in 2455 tin solution for 2.50.5 seconds. |
| Soldering Resistance | 1. Plastic parts: no obvious deformation, damage, or blistering. 2. Electrical characteristics must meet specifications. | Tested via 2605 reflow or wave soldering for 51S. |
| Pin Fixing Force | Min 12N | Single pin, tested at 253mm/min. |
| Terminal Retention in Plastic Parts | Min 15N | Single terminal, tested at 253mm/min along wire direction. |
| Mechanical Life | Contact Resistance: Max 30m | 50 cycles of mating/unmating at 10 cycles/min, under no power. |
| Insertion/Pull-out Force | See table below | Tested at 205mm/min, with lock removed. |
| Insertion/Pull-out Force (N) | |||||
| Position | Insert | Pull Out | Position | Insert | Pull Out |
| 1 | 16.00 | 2.00 | 9 | 48.00 | 24.00 |
| 2 | 20.00 | 10.00 | 10 | 52.00 | 26.00 |
| 3 | 24.00 | 12.00 | 11 | 56.00 | 28.00 |
| 4 | 28.00 | 14.00 | 12 | 60.00 | 30.00 |
| 5 | 32.00 | 16.00 | 13 | 64.00 | 32.00 |
| 6 | 36.00 | 18.00 | 14 | 68.00 | 34.00 |
| 7 | 40.00 | 20.00 | 15 | 72.00 | 36.00 |
| 8 | 44.00 | 22.00 | 16 | 76.00 | 38.00 |
2410121633_JUSHUO-AFC25-S05DCA-00_C2764244.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
