Horizontal SMT connector rated current 0.5A JUSHUO AFC10-S07QCA-00 1.0mm pitch operating temperature range
Manufacturer:
JUSHUO
Description:
Connector Header 7 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Pins Structure:
1x7P
Reference Series:
SH
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
7
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
9.3mm
Z-Height Of The Board:
3.14mm
Mounting Type:
卧贴
Row Spacing:
-
Mfr. Part #:
AFC10-S07QCA-00
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
AFC10-S07QCA-00
Introduction
Product Acknowledgement
Customer: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Product Name: 1.0mm
Material number: AFC10-S**QCA-00 (**PIN)
Version: 1 1 version
Page: 2 of 8
Product Overview
This product specification applies to the 1.0 series of connectors. It details standard ratings, environmental characteristics, electrical characteristics, and mechanical properties for the AFC10-S**QCA-00 model, a 1.0mm pitch horizontal SMT connector.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Certifications: ROHS environmental protection requirements
- Color: Not specified
Technical Specifications
| Item | Specification | Test Method | Performance Requirement | |||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard Rating | Rated Voltage: 50V AC/DC Rated Current: 0.5A Operating Temperature Range: -25+105 Operating Humidity Range: Below 90% RH | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Packing | Inner packing: Joint and several, Outer packing: Carton, sealed and secured. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Transport | Any means allowed, avoid rain, snow, sunlight, collision, extrusion. Ambient temperature: -20 to +50. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Storage | Ambient temperature: -20+50, Relative humidity: 90%, free from corrosive gases (acidic, alkaline). | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Part Name/Material | Base: LCP E130i Reed: Phosphor copper Stator: Phosphor copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Appearance | Plastic parts: free from scars, mottling, cracks, burrs, flash, material deficiency, deformation. Metal parts: smooth, no rust, oxidation, peeling, blackening, mechanical damage. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Electrical Characteristics: Contact Resistance | 20m Max | Test with contact resistance meter after mating. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Electrical Characteristics: Insulation Resistance | 100M Min | Apply 500V DC for 1 minute between adjacent contacts and between contacts and enclosure after mating. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Electrical Characteristics: Withstand Voltage | No breakdown or flashover | Apply 500V AC for 1 minute between adjacent contacts and between contacts and enclosure after mating. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Heat Test | Appearance: No damage Contact Resistance: 30m Max | Place mated connector in +1052 for 96H, then recover for 1-2H. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Cold Test | Appearance: No damage Contact Resistance: 30m Max | Place mated connector in -252 for 96H, then recover for 1-2H. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Moisture Resistance | Appearance: No damage Insulation Resistance: 50M Min Withstand Voltage: 200VAC/min | Place mated connector in 402, 90-96% RH for 96H, then recover for 1-2H. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Temperature Cycle | Appearance: No abnormalities Contact Resistance: 30m Max | 5 cycles: -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H). Recover for 2H. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Salt Spray Test | Appearance: No damage, corrosion (Hardware: no severe corrosion exposing base metal; slight corrosion on blanking surface allowed if performance is not affected). Contact Resistance: 30m Max | Continuous spray with 51% NaCl solution for 24H. Wash with distilled water, recover for 1-2H. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Solderability | Tin area above 95% | Dip in 2355 tin solution for 2.50.5 seconds. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Soldering Resistance | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | Place connector on PCB and subject to 2605 reflow or wave soldering for 51S. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mechanical: Pin Fixing Force | Single pin: 7N Min | Fix pin holder, apply force at pin front end at 253mm/min rate until pin withdraws. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mechanical: Terminal Retention in Plastic Parts | Single terminal: 5N Min | Match terminal with socket, pull terminal from socket at 253mm/min rate along wire direction. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mechanical: Mechanical Life | Contact Resistance: 30m Max | Plug and unplug 50 times at a speed of 10 times/min without power. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mechanical: Insert/Withdrawal Force | See table below | (1) Match socket and terminal, test insertion/withdrawal on the same axis as pin seat, remove lock during test (speed: 205mm/min). |
|
2410121633_JUSHUO-AFC10-S07QCA-00_C2764186.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
