Horizontal SMT connector 2.0mm pitch JUSHUO AFC20-S05ACA-00 rated voltage 250V AC DC current 2.0A
Manufacturer:
JUSHUO
Description:
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -20℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
7.55mm
Reference Series:
PH
Pins Structure:
1x5P
Contact Plating:
锡
Contact Material:
黄铜;LCP
Operating Temperature:
-20℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
2mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
5
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
13.9mm
Z-Height Of The Board:
5.55mm
Mounting Type:
卧贴
Row Spacing:
-
Mfr. Part #:
AFC20-S05ACA-00
Package:
SMD,P=2mm,Surface Mount,Right Angle
Model Number:
AFC20-S05ACA-00
Introduction
Product Overview
This document is a product acknowledgment for the 2.0mm pitch horizontal SMT connector, model AFC20-S**ACA-00. It details the product's specifications, electrical and environmental characteristics, and mechanical properties, serving as a confirmation document between the manufacturer and the customer. The product is designed for applications requiring reliable electrical connections with specific voltage and current ratings, within a defined operating temperature and humidity range.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Product Name: 2.0mm pitch horizontal SMT connector
- Product Model: AFC20-S**ACA-00
- Version: 1 (1 version)
- Environmental Compliance: ROHS
Technical Specifications
| Item | Specifications | Test Method | Performance Requirements |
| Standard Rating | |||
| Rated Voltage | 250V AC/DC | ||
| Rated Current | 2.0A | ||
| Operating Temperature Range | -25+105 | ||
| Operating Humidity Range | Relative humidity is below 90% | ||
| Packing & Transport | |||
| Packing | Inner packing: joint and several, outer packing: carton. Product sealed in the box, no shaking. | ||
| Transport Environment Temperature | -20 to +50 | ||
| Storage | |||
| Storage Environment Temperature | -20+50 | ||
| Storage Humidity | Relative humidity not more than 90% | ||
| Part Name/Material | |||
| Part Name | Model | Material | |
| Base | 2.0 LCP | E130i | |
| Pin | 2.0 | Brass | |
| Stator | 2.0 | Brass | |
| Appearance | |||
| Appearance | Plastic parts: free of obvious scars, mottled, cracked, burr, flash, lack of material, deformation. Metal parts: smooth, no rust, oxidation, peeling, blackening, mechanical damage. | ||
| Electrical Characteristics | |||
| Contact Resistance | 20m Max | Plugged connector, tested with contact resistance meter. | |
| Insulation Resistance | 1000M Min | Plugged connector, 1000V DC for 1 minute between adjacent contacts and between contacts and enclosure. | |
| Withstand Voltage | No breakdown and flashover | Plugged connector, 1000V AC for 1 minute between adjacent contacts and between contacts and enclosure. | |
| Environmental Characteristics | |||
| Heating Test | Appearance: no damage. Contact resistance: 30m Max. | Plugged connector in +1052 for 96H, then 1-2H at normal temp. | |
| Cold Tolerance Test | Appearance: no damage. Contact resistance: 30m Max. | Plugged connector in -252 for 96H, then 1-2H at normal temp. | |
| Moisture Resistance Test | Appearance: no damage. Insulation resistance: 500M Min. Withstand voltage: 600V AC/min ute MIN. | Plugged connector in 402, 90~96% RH for 96H, then 1-2H at normal temp. | |
| Temperature Cycle | Appearance: no abnormalities. Contact resistance: 30m Max. | 5 cycles of -253 (30min), room temp (1H), +1053 (30min), room temp (1H), then 2H recovery. | |
| Salt Spray Test | Appearance: no damage or corrosion. Contact resistance: 30m Max. | Suspended sample, sprayed with 51% NaCl solution for 24H, washed, then 1-2H recovery. | |
| Weldability | Tin area above 95% | Dip in 2455 tin solution for 2.50.5 seconds. | |
| Soldering Resistance | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | Connector on PCB, subjected to 2605 reflow or wave soldering for 51S. | |
| Mechanical Properties | |||
| Pin Fixing Force | Single pin 10N Min | Apply force to pin front end at 253mm/min until withdrawal. | |
| Terminal Retention in Plastic Parts | Single terminal: 7N Min | Pull terminal from socket at 253mm/min along conductor direction. | |
| Mechanical Life | Contact resistance: 30m Max | Plug and unplug 50 times at 10 times/min under no power. | |
| Insertion/Extraction Force | See table below | Fit socket and terminal, insert/extract on same axis with lock removed. Test speed: 205mm/min. | |
| Position | Insertion (N) | Pull Out (N) | |
| 1 | 4.00 | 1.50 | |
| 2 | 24.00 | 6.00 | |
| 3 | 28.00 | 7.50 | |
| 4 | 32.00 | 9.00 | |
| 5 | 36.00 | 10.50 | |
| 6 | 40.00 | 12.00 | |
| 7 | 44.00 | 13.50 | |
| 8 | 48.00 | 15.00 | |
| 9 | 52.00 | 16.50 | |
| 10 | 56.00 | 18.00 | |
| 11 | 60.00 | 19.50 | |
| 12 | 64.00 | 21.00 | |
| 13 | 68.00 | 22.50 | |
| 14 | 72.00 | 24.00 | |
| 15 | 76.00 | 25.50 | |
| 16 | 80.00 | 27.00 | |
2410121633_JUSHUO-AFC20-S05ACA-00_C2764214.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
