Compact Design 1.0mm Pitch Vertical SMT Connector JUSHUO AFC10-S11PCA-00 for Electronics Assembly
Manufacturer:
JUSHUO
Description:
Connector Header 11 position 1mm Pitch 500mA Surface Mount,Vertical -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
3.76mm
Pins Structure:
1x11P
Reference Series:
SH
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
11
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
13.3mm
Z-Height Of The Board:
4.4mm
Row Spacing:
-
Mounting Type:
立贴
Mfr. Part #:
AFC10-S11PCA-00
Package:
SMD,P=1mm
Model Number:
AFC10-S11PCA-00
Introduction
Product Acknowledgement
Customer: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Product Name: 1.0mm (1.0mm Pitch Vertical SMT Connector)
Material Number: AFC10-S**PCA-00 (**PIN / ** indicates PIN count)
Version: 1 1 version
Page: 2 of 8
Product Overview
This product specification applies to the 1.0mm pitch vertical SMT connector series, model AFC10-S**PCA-00. It is designed for applications requiring reliable electrical connections with a 1.0mm pitch, suitable for surface mount technology. The connector is built to meet stringent electrical, environmental, and mechanical performance requirements.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Certifications: ROHS environmental protection requirements
- Color: Not specified
Technical Specifications
| Item | Specification | Test Method | Performance Requirement |
|---|---|---|---|
| 2. Standard Rating | |||
| Rated Voltage | 50V AC/DC | ||
| Rated Current | 0.5A | ||
| Operating Temperature Range | -25+105 | ||
| Operating Humidity Range | Below 90% RH | ||
| 7. Part Name/Material | |||
| Part Name | Material | ||
| Base | LCP E130i | ||
| Reed | Phosphor copper | ||
| Stator | Phosphor copper | ||
| 9. Electrical Characteristics | |||
| Contact Resistance | Plugged connector, tested with contact resistance meter. | 20m Max | |
| Insulation Resistance | Plugged connector, 500V DC for 1 minute between adjacent contacts and between contacts and enclosure. | 100M Min | |
| Withstand Voltage | Plugged connector, 500V AC for 1 minute between adjacent contacts and between contacts and enclosure. | No breakdown and flashover | |
| 10. Environmental Characteristics | |||
| Heating Test | Plugged connector in +1052 for 96H, then 1-2H at normal temp. | Appearance: No damage. Contact Resistance: 30m Max | |
| Cold Tolerance Test | Plugged connector in -252 for 96H, then 1-2H at normal temp. | Appearance: No damage. Contact Resistance: 30m Max | |
| Moisture Resistance Test | Plugged connector in 402, 90-96% RH for 96H, then 1-2H at normal temp. | Appearance: No damage. Insulation Resistance: 50M MIN. Withstand Voltage: 200VAC/min | |
| Temperature Cycle | 5 cycles: -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H), then 2H recovery. | Appearance: No abnormalities. Contact Resistance: 30m Max | |
| Salt Spray Test | Continuous spray with 51% NaCl solution for 24H, then rinse with distilled water and 1-2H recovery. | Appearance: No damage, corrosion. Contact Resistance: 30m Max | |
| Weldability | Dip in 2355 tin solution for 2.50.5 seconds. | Tin area above 95% | |
| Soldering Resistance | Reflow or wave soldering at 2605 for 51S on PCB. | 1. Plastic parts: No obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | |
| 11. Mechanical Characteristics | |||
| PIN Fixing Force | Apply force at pin front end at 253mm/min until pin withdraws. | Single pin: 7N Min | |
| Terminal Retention in Plastic Parts | Pull terminal out of socket at 253mm/min along wire direction. | Single terminal: 5N Min | |
| Mechanical Life | Plug and unplug 50 times at 10 times/min without power. | Contact Resistance: 30m Max | |
| Insert/Withdraw Force | Test methods: (1) Match socket and terminal, insert/pull on same axis, remove lock (205mm/min). | See detailed table below for PIN position specific values. | |
| PIN Position | Insert (N) | Withdraw (N) | PIN Position | Insert (N) | Withdraw (N) |
|---|---|---|---|---|---|
| 1 | 3.00 | 0.50 | 9 | 29.00 | 5.50 |
| 2 | 8.00 | 2.00 | 10 | 32.00 | 6.00 |
| 3 | 11.00 | 2.50 | 11 | 35.00 | 6.50 |
| 4 | 14.00 | 3.00 | 12 | 38.00 | 7.00 |
| 5 | 17.00 | 3.50 | 13 | 41.00 | 7.50 |
| 6 | 20.00 | 4.00 | 14 | 44.00 | 8.00 |
| 7 | 23.00 | 4.50 | 15 | 47.00 | 8.50 |
| 8 | 26.00 | 5.00 | 16 | 50.00 | 9.00 |
2410121633_JUSHUO-AFC10-S11PCA-00_C2764205.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
