Horizontal SMT connector JUSHUO AFC20-S11ACA-00 2.0mm pitch ROHS compliant for electronic device manufacturing
Manufacturer:
JUSHUO
Description:
Connector Header 11 position 2mm Pitch 2A Surface Mount, Right Angle -20℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
7.55mm
Pins Structure:
1x11P
Reference Series:
PH
Contact Plating:
锡
Contact Material:
黄铜;LCP
Operating Temperature:
-20℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
2mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
11
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
25.9mm
Z-Height Of The Board:
5.55mm
Mounting Type:
卧贴
Row Spacing:
-
Mfr. Part #:
AFC20-S11ACA-00
Package:
SMD,P=2mm,Surface Mount,Right Angle
Model Number:
AFC20-S11ACA-00
Introduction
Product Overview
This product is a 2.0mm pitch horizontal SMT connector, model AFC20-S**ACA-00, designed for various electronic applications. It meets ROHS environmental protection requirements and is suitable for a wide operating temperature range.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Material: Base: LCP E130i; Pin: Brass; Stator: Brass
- Certifications: ROHS compliant
Technical Specifications
| Item | Specifications | Test Method | Performance Requirements | |||
| 2. Standard Rating | ||||||
| Rated Voltage | 250V AC/DC | |||||
| Rated Current | 2.0A | |||||
| Operating Temperature Range | -25+105 | |||||
| Operating Humidity Range | Below 90% RH | |||||
| 8. Appearance and Size | ||||||
| Appearance | Plastic parts: no obvious scars, discoloration, cracks, burrs, flash, material shortage, or deformation affecting use. Metal parts: smooth, no rust, oxidation, peeling, blackening, or obvious mechanical damage. | |||||
| Size | Refer to engineering drawing | |||||
| 9. Electrical Characteristics | ||||||
| Contact Resistance | 20m Max | Plug in connector, test with contact resistance meter. | ||||
| Insulation Resistance | 1000M Min | Plug in connector, apply 1000V DC between adjacent contacts and between contacts and enclosure for 1 minute. | ||||
| Withstand Voltage | No breakdown and flashover | Plug in connector, apply 1000V AC between adjacent contacts and between contacts and enclosure for 1 minute. | ||||
| 10. Environmental Characteristics | ||||||
| Heating Test | Appearance: no damage; Contact Resistance: 30m Max | Place plugged connector in +1052 environment for 96H, then test after 1-2H in normal environment. | ||||
| Cold Tolerance Test | Appearance: no damage; Contact Resistance: 30m Max | Place plugged connector in -252 environment for 96H, then test after 1-2H in normal environment. | ||||
| Moisture Resistance Test | Appearance: no damage; Insulation Resistance: 500M Min; Withstand Voltage: 600V AC/min MIN | Place plugged connector in 402, 90~96% RH environment for 96H, then test after 1-2H in normal environment. | ||||
| Temperature Cycle | Appearance: no abnormalities; Contact Resistance: 30m Max | 5 cycles of -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H). Test after 2H recovery. | ||||
| Salt Spray Test | Appearance: no damage or corrosion; Contact Resistance: 30m Max | Continuous spray with 51% NaCl solution for 24H. Wash with distilled water, test after 1-2H recovery. | ||||
| Weldability | Tin area above 95% | Dip welded part in 2455 tin solution for 2.50.5 seconds. | ||||
| Soldering Resistance | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | Place connector on PCB, reflow at 2605 for 51S or wave solder. | ||||
| 11. Mechanical Properties | ||||||
| PIN Fixing Force | Single PIN: 10N Min | Fix pin holder, apply force at 253mm/min until pin withdraws. | ||||
| Terminal Retention in Plastic Parts | Single terminal: 7N Min | Pull terminal from socket at 253mm/min along conductor direction. | ||||
| Mechanical Life | Contact Resistance: 30m Max | Plug and unplug 50 times at 10 times/min under no power. | ||||
| Insertion/Extraction Force | See table below | Fit socket and terminal, test insertion/extraction on the same axis with needle seat. Remove socket lock. Test speed: 205mm/min. | ||||
| Position | Insertion (N) | Extraction (N) | Position | Insertion (N) | Extraction (N) | |
| 1 | 4.00 | 1.50 | 9 | 52.00 | 16.50 | |
| 2 | 24.00 | 6.00 | 10 | 56.00 | 18.00 | |
| 3 | 28.00 | 7.50 | 11 | 60.00 | 19.50 | |
| 4 | 32.00 | 9.00 | 12 | 64.00 | 21.00 | |
| 5 | 36.00 | 10.50 | 13 | 68.00 | 22.50 | |
| 6 | 40.00 | 12.00 | 14 | 72.00 | 24.00 | |
| 7 | 44.00 | 13.50 | 15 | 76.00 | 25.50 | |
| 8 | 48.00 | 15.00 | 16 | 80.00 | 27.00 | |
2410121633_JUSHUO-AFC20-S11ACA-00_C2764220.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
