Home > Products > Arrays, Edge Type, Mezzanine (Board to Board) >Rectangular Connector Contacts > kinghelm KH A12501 T 1.25 Ultra Thin Series Connector Featuring Tin Plated Phosphor Bronze Terminals

kinghelm KH A12501 T 1.25 Ultra Thin Series Connector Featuring Tin Plated Phosphor Bronze Terminals

Manufacturer:
kinghelm
Description:
Rectangular Connector Contacts RoHS
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Contacts
Specifications
Mfr. Part #:
KH-A12501-T
Model Number:
KH-A12501-T
Introduction

Product Overview

This specification covers the 1.25 ultra-thin series connector. It is designed for various applications requiring reliable electrical connections with specific material and performance criteria.

Product Attributes

  • Brand: KINGHELM
  • Origin: Shenzhen Kinghelm Electronics Co., Ltd.
  • Product Series: 1.25 Ultra-thin Series Connector
  • Certifications: UL94V-0 (for Housing and Wafer)

Technical Specifications

ItemSpecification/RequirementDetails
Scope1.25 Ultra-thin Series Connector
AppearanceProduct surface without defect, dirt, crack, and mechanical damage; contact without rust, plating not oxidized and not peeled.
DimensionAccording to drawings
Material & Surface TreatmentTerminalPhosphor bronze, 0.15mm thick; Tin Plating: 2.5-5m
HousingPBT, UL94V-0, Color: White
WaferPA9T, UL94V-0, Color: Beige
ContactPhosphor bronze, 0.30mm thick; Gold Plating: 0.5~1
Ratings & Applicable WiresRated Voltage125V AC/DC
Rated Current1A AC/DC
Ambient Temperature Range-25 to +85
Applicable Wire GaugeAWG28#-32#
Electrical PerformanceContact ResistanceInitial: 20m; After Test: 30m
Withstand Voltage500V AC for 1 minute (between adjacent terminals or ground) - No Breakdown/Flashover
Insulation Resistance 100M (at 500V DC between adjacent terminals or ground)
Mechanical PerformanceTerminal Crimping Wire StrengthAWG#28: 13N; AWG#30: 8N; AWG#32: 6N
Terminal/Housing Retention Force 8N per contact
Insertion & Withdrawal ForceRefer to Section 8
Pin Retention Force 2N per contact
Endurance CharacteristicsRepeated Insertion/Withdrawal30 cycles; Contact Resistance: 30 m Max
Temperature Rise 30 Max (at rated current until thermal stability)
Vibration TestAmplitude: 1.5mm P-P; Frequency: 10-55-10 Hz; Duration: 2 hours per axis (X,Y,Z); Contact Resistance: 30 m Max; Discontinuity: 1 micro-second Max
Heat Resistance852, 96 hours; Contact Resistance: 30 m Max
Cold Resistance-253, 96 hours; Contact Resistance: 30 m Max
Humidity602, 90~95% RH, 96 hours; Contact Resistance: 30 m Max; Withstand Voltage: No Breakdown/Flashover; Insulation Resistance: 100M Min
Temperature Cycling5 cycles (-25 for 30 min to +85 for 30 min); Contact Resistance: 30 m Max
Salt Spray352, 51% solution, 241 hours; Contact Resistance: 30 m Max
SolderabilitySoldering Time: 3-5 sec; Temp: 2455; Solder Wetting: 95% immersion area
Solder-ResistanceSMT reflow; Soldering time: 5-10 sec; Temp: 2555 (Refer to 9.1)
Insertion/Withdrawal ForceRefer to Section 8 for details based on PIN count.
SMT ProcessLead-free process temperature curveRefer to Section 9.1. Note: Check reflow soldering conditions with own devices.
CautionPlastic absorbs moisture. Avoid exposure to temperatures > 30, humidity > 60%RH after opening package. Use within 24 hours to prevent foaming/deformation during reflow/wave soldering.

2507241130_kinghelm-KH-A12501-T_C49424500.pdf

Send RFQ
Stock:
MOQ: