Low PIM SMA Female to 7/16 DIN Male Adapter L-com LCAD91036 for RF Test and Measurement Applications
Product Overview
The L-com LCAD91036 is a Low PIM SMA Female to 7/16 DIN Male adapter with a straight body geometry, designed for general-purpose test applications. It allows for connections between different series of RF connectors and offers low VSWR and PIM levels. This adapter is suitable for testing, measurement, Satcom, military, and defense industries, featuring high repeatability and a wide operating temperature range.
Product Attributes
- Brand: L-com
- Connector 1: SMA Female
- Connector 2: 7/16 DIN Male
- Material (Contact): Gold Plated Beryllium Copper
- Material (Insulation): PTFE
- Material (Outer Conductor): Brass Tri-Metal
- Material (Body): Brass Tri-Metal
- Material (Coupling Nut): Brass Tri-Metal
- Plating (Contact): 200 in minimum Gold
- Plating (Outer Conductor): 100 in minimum Tri-Metal
- Plating (Body): 100 in minimum Tri-Metal
- Plating (Coupling Nut): 100 in minimum Tri-Metal
- Interface Specification (SMA): MIL-STD-348
- Interface Specification (7/16 DIN): IEC 169-4
- Certifications: Compliant with MIL-STD-348 and IEC 169-4.
Technical Specifications
| Description | Connector 1 | Connector 2 | Value | Units |
| Product Name | LCAD91036 | LCAD91036 | Low PIM SMA Female to 7/16 DIN Male Adapter | |
| Frequency Range | DC to 7.5 GHz | |||
| VSWR | 1.09:1 (Max up to 7.5 GHz) | |||
| Passive Intermodulation (PIM) | < -170 dBc (Typical) | dBc | ||
| Impedance | 50 | Ohm | ||
| Dielectric Withstanding Voltage (AC) | 1,000 | Vrms | ||
| Operating Temperature Range | -55 to +155 | C | ||
| Mating Cycles | SMA Female | 7/16 DIN Male | 100 / 500 | |
| Mating Torque | SMA Female | 7/16 DIN Male | 221 to 265 in-lbs / 24.97 to 29.95 Nm | |
| Dimensions (Length) | 1.18 in [29.97mm] | |||
| Dimensions (Width) | 1.25 in [31.75mm] | |||
| Dimensions (Height) | 1.25 in [31.75mm] | |||
| Weight | 0.1917 lbs [86.95g] |
2310201433_L-com-LCAD91036_C6445229.pdf