High density four row connector Samtec TFM 130 22 S D A K TR with 127 mm pitch and ruggedized options

Product Overview

The Samtec Tiger Eye Systems (1.27 mm / .050" pitch) are high-density, four-row connectors designed for demanding applications. They offer a range of ruggedizing options including screw down, locking clip, friction latching, and weld tab. These connectors are shrouded, polarized, and keyed for secure mating and are available in surface mount or through-hole termination styles. Discrete wire assemblies are also available. The series is qualified for Severe Environment Testing, aligning with MIL-DTL-55302 standards, making them suitable for critical applications.

Product Attributes

• Brand: Samtec
• Series: Tiger Eye (FOLC/MOLC, SFM/TFM, SFC/TFC)
• Pitch: 1.27 mm / .050"
• Insulator Material: Black LCP
• Contact Material: BeCu (SFM), Phosphor Bronze (TFM, SFC, TFC)
• Plating Options: Gold (Au) or Tin (Sn) over Nickel (Ni), E.L.P. plating option available
• Ruggedizing Options: Screw down, Locking Clip, Friction Latching, Weld Tab
• Mating Features: Shrouded, Polarized, Keyed
• Termination Styles: Surface Mount, Through-Hole
• Discrete Wire Assemblies: Single or Double Row, 28 and 30 AWG PVC or Teflon Fluoropolymer
• Cable Components & Tooling: Available (ISDF/CC03)
• Severe Environment Testing Qualified: Yes (SFM/TFM), aligns with MIL-DTL-55302
• Teflon Trademark: Used under license by Samtec

Technical Specifications

Lead Style Options (TFM/SFM)

*N/A with 07, -DH or -S row option. *Not Available with 07 or -S row option.

Configuration Options

Series: TFM = Standard, TFML = Locking (01 & 02 lead style only)

No. Pins Per Row: 03, 04, 06, 08 (TFM 01 & 02 only); 05, 07, 10, 15, 20, 25, 30, 35, 40, 45, 50 (Standard sizes)

Lead Style: Specify from chart (SMT: -02, -12, -22, -32; T/H: -01, -03, -11, -13, -21, -23, -31)

Plating Option: L = 15 " (0.38 m) Gold on post, Matte Tin on tail (E.L.P. plating option available)

Row Option: S = Single Row (TFM only); D = Double Row; DH* = Double Horizontal (TFM lead style 02 only, 05 thru 50 positions only, TR or FR option only available)

Options:

• RA = Right-angle (Lead style 01 only)
• RE1 = Right-angle Elevated for (1.60 mm) .062" PCB (Requires TFM lead style 01, D row and WT)
• RE2 = Right-angle Elevated for (2.36 mm) .093" PCB (Requires TFM lead style 01, D row and WT)
• A = Alignment Pin
• LC = Locking Clip (Manual Placement required)
• DS = Dual Screw Down for (1.60 mm) .062" PCB (05-40 positions only, TFM lead styles 01 and 02 only, Requires D row option, Mates with SFMDS option and SFSD/SFSDT SS and DS option only, Not available with A, LC, WT, K, P, XR)
• WT = Weld Tab (TFM lead styles 01 and 02 only, Required callout for RE1 & RE2, Mates to SFSS/SFSD SR and DR option only, 05-50 positions only, SMT lead styles only)
• K = Polyimide Film Pick & Place Pad
• P = Plastic Pick & Place Pad (5 positions min., Not available with 5 position with WT)
• TR = Tape & Reel
• -FR = Full Reel Tape & Reel (must order max. quantity per reel; contact Samtec for quantity breaks)

*Not available with RA, RE1 and RE2 unless otherwise noted.

*Not available with DS.

*Specify only RA, RE1 or RE2.

*Specify only A, LC, DS or WT.

*Specify only K or P.

*Specify TR or -FR last.

View complete specifications at: samtec.com?TFM & samtec.com?TFML

Visit samtec.com/set for Severe Environment Testing information.

Some lengths, styles and options are non-standard, non-returnable.