Durable power connection SAMZO 9CH4110BEKA DC jack suitable for various electrical applications
Manufacturer:
SAMZO
Description:
Power Barrel Connector Jack Panel Mount
Category:
Audio Connectors/Power Connectors
Specifications
Mounting Type:
焊线式
Connector Type:
DC电源插座
Rated Current:
10A
Working Temperature:
-16℃~+65℃
Rated Voltage:
30V
Mfr. Part #:
9CH4110BEKA
Package:
Through Hole
Model Number:
9CH4110BEKA
Introduction
Product Overview
SAMZO DC JACK 9CH4110BEKA is a high-current power jack designed for reliable electrical connections. It is manufactured by Samzo Parts (China) Electronics Co., Ltd. and is suitable for various applications requiring a robust DC power input.
Product Attributes
- Brand: SAMZO
- Origin: China
- Product Name: DC JACK
- Model Number: 9CH4110BEKA
Technical Specifications
| Item | Test Conditions | Performance | Specification |
| Mechanical | |||
| 1. Connection Force | Measured after connecting and disconnecting using standard plug gauge 3 times. | 3~20N | |
| Disconnect Force | Measured after connecting and disconnecting using standard plug gauge 3 times. | 3~20N | |
| 2. Terminal Strength | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. | ||
| Electrical | |||
| 3.1 Contact Resistance | Measured at small current (100mA or less) 1000Hz | 0.03 | |
| 3.2 Insulation Resistance | Apply a voltage of 500V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100M | |
| 3.3 Dielectric Strength | AC 500V rms(50~60Hz) for 1 min trip current:0.5mA (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | Without damage to parts arcing or breakdown etc. | |
| Durability | |||
| 4.1 Solderability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2405 for 30.5 seconds. (1) Solder wetting time shall be 3 sec or less (2) The area of soldering should be over 75% | ||
| 4.2 Resistance to Soldering Heat Test | Soldering iron method: Bit temperature 3305 Application time of soldering iron 30.5 sec. However excessive pressure shall not be applied to the terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| 4.3 Humidity Test | The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr for other procedures. | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| 4.4 Heat Test | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to the controlled recovery measurement. | ||
| 4.5 Cold Test | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour after which. | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| 4.6 Life Test | Without load: Connection and disconnection shall be made with the mating plugs and jacks for 5,000 cycles at a speed of 10 to 25 cycles/min. Load: At rating condition (non-inductive load) connection and disconnection shall be made 1,000 cycles at a speed 10 to 20 cycles/min. (1) Contact Resistance shall be 0.1 (2) Disconnection Force shall be 3 to 20N (3) Mechanical and Electrical Characteristics shall be satisfied. | ||
| 4.7 Temperature Cycling Test | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned allowed to remain in room ambient condition for 30 minutes. Temp(): 60 to -40. Time (hour): 0, 2, 4, 6. | There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). | |
| 4.8 Heat Shock Test | The jack shall be subjected to 6 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. Temp (): 60 to -10. Time(hour): 0, 1, 2, 3. | There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). | |
2504251720_SAMZO-9CH4110BEKA_C48580341.pdf
Related Products
Durable vertical plug in DC power jack with 2.5mm needle diameter and 5 amp rated electrical load SAMZO 9CL3140BTGA
Power Barrel Connector Jack 2.5mm ID Panel Mount
Durable SAMZO 9FL3127ATDA DC jack connector with 24V 3A max current rating and IPX7 waterproof design
Power Barrel Connector Jack 1.3mm ID 5mm OD Panel Mount
Durable DC Jack Connector SAMZO 9FL3152ATFB 3PIN DIP Type Rated 24V 5A Max for Electronic Applications
Power Barrel Connector Jack 2mm ID 7.7mm OD Panel Mount
2P female DC power jack SAMZO 9CH2162BEKA featuring wire welding mounting and 16.2mm overall length size
Power Barrel Connector Jack Panel Mount
Recessed board DIP 5 pin DC power jack 25 mm needle diameter conventional interface SAMZO 9CN5125BEGB
Power Barrel Connector Jack 2.5mm ID Panel Mount
DC Jack SAMZO 9CW4130BTFB Horizontal DIP Mount High Current Flat Opening Interface 13 Millimeter
Power Barrel Connector Jack 2mm ID Panel Mount
9 pin horizontal DC power jack SAMZO 9CW9123BTKA with 5 millimeter needle diameter and gold plated housing
Power Barrel Connector Jack Panel Mount
3 Pin Horizontal SMT DC Power Jack 8A Rated SAMZO 9CE3145BTGA with Fixed Column Type and Flared Opening Design
Power Barrel Connector Jack 2.5mm ID Panel Mount
Vertical Plug In DC Power Jack SAMZO 9CL4130BEGA 20 Amp Current Rating Four Pin Electrical Connector
Power Barrel Connector Jack 2.5mm ID Panel Mount
2.5 mm Needle Diameter Horizontal DIP DC Power Jack with 5 Pins and 14.5 mm Length SAMZO 9CW5105BEGA
Power Barrel Connector Jack 2.5mm ID Panel Mount
Send RFQ
Stock:
MOQ:
