High Reliability SHOU HAN 0.5-16P XJ-H2.0 119 Flat Cable Connector for Flexible Circuit Applications
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 16 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
16P
Pitch:
0.5mm
Voltage Rating (Max):
30V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
0.5-16P XJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
0.5-16P XJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors, designed for flexible flat cable applications. These connectors offer reliable electrical and mechanical performance, suitable for a wide operating temperature range and various environmental conditions. They are ideal for applications requiring secure and stable connections for flat flexible cables.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Name: FFC/FPC Flat Cable Connector
- Main Body Material: LCP UL 94V-0
- Housing Lock Material: LCP UL 94V-0
- Terminal/Contact Material: Phosphor Bronze
- Metal Surface Finish: Tin Plated
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 30V [AC/DC (Virtual value) 50Hz] | |
| Rated Current (MAX) | 0.2A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 100 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (For 0.3mm thick FFC) |
| Terminal/Housing Retention Force | 0.3N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute (without power). |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration Resistance | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | Under DC 1mA current. Vibration along XYZ axes: Amplitude 1.5mm P-P, Sweep time 10-55-10Hz/min, Duration 2 hours in each axis. |
| Shock Resistance | Appearance: No Damage Discontinuity: 1 ms MAX | Under DC 1mA current. 490m/s {50G}, 3 strokes in each of 6 directions. |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 852, 96 hours, then return to room temperature for 1-2 hours. (Mate applicable FPC/FFC) |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | -402, 96 hours, then return to room temperature for 1-2 hours. (Mate applicable FPC/FFC) |
| Humidity Resistance | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, measured within 0.5 hours after returning to room temperature. (Mate applicable FPC/FFC) |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature between cycles. (Mate applicable FPC/FFC) |
| Salt Spray Resistance | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX | 48 4 hours exposure to a salt spray from a 51% solution at 352. Washed with room temperature water and dried after test. (Mate applicable FPC/FFC) |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. (Mate applicable FPC/FFC) |
| NH3 Gas Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. (Mate applicable FPC/FFC) |
| Solderability | Solder Wetting: 95% | Soldering Time: 20.5 sec. Soldering Temperature: 2455, at 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455, at least 5 times. |
| Product Model/Part Number | 0.5-16P XJ-H2.0 119 | |
Operation Instructions (Flip-Top Type)
Step 1: Use the thumb or forefinger to raise the top cover upwards.
Step 2: Insert the FPC with the conductive side facing down, parallel to the connector.
Step 3: Press the top cover lightly and rotate it down to the locked position until the FPC is fully inserted and secured.
Step 4: To withdraw the FPC, carefully lift the top cover and then pull out the FPC.
Warnings:
- The rotation angle of the top cover should not exceed 120 degrees.
- Inserting the FPC at an excessive angle may cause electrical discontinuity.
- The upward pulling force when withdrawing the FPC should not exceed 0.04N/pin max.
- Do not use excessive force when opening the connector's top cover to avoid touching the terminals.
2509030922_SHOU-HAN-0-5-16P-XJ-H2-0-119_C5373436.pdf
Send RFQ
Stock:
MOQ:
