Flexible Flat Cable Connector SHOU HAN 0.5-10P XJH2.0 043 Featuring Phosphor Bronze Terminal Contact
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 10 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
10P
Pitch:
0.5mm
Voltage Rating (Max):
30V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
黄铜
Mfr. Part #:
0.5-10P XJH2.0 043
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
0.5-10P XJH2.0 043
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors from Shenzhen Shouhan Technology Co., Ltd. Designed for flexible flat cable connections, these connectors offer reliable electrical and mechanical performance within a specified temperature range. They are suitable for applications requiring a maximum rated voltage of 30V AC/DC and a maximum rated current of 0.2A.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Type: FFC/FPC Flat Cable Connector
- Material (Main body/Housing Lock): LCP UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze
- Plating: Tin plated metal surface
Technical Specifications
| Category | Item | Specification/Requirement | Test Condition |
|---|---|---|---|
| Ratings | Rated Voltage (MAX) | 30V [AC/DC (effective value) 50Hz] | - |
| Rated Current (MAX) | 0.2A | - | |
| Ambient Temperature Range | -25+85 | - | |
| Electrical Performance | Contact Resistance | 100 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | |
| Dielectric Strength | - | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (effective value) for 1 minute between adjacent terminals or ground. |
| Mechanical Performance | Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at a speed of 253mm/minute. |
| Terminal / Housing Retention Force | 0.4N MIN | Pull the terminal at a speed of 25 3mm per minute. | |
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Actuator up to 20 cycles at a speed of less than 10 cycles/minute (no power). | |
| Environmental Performance | Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | DC 1mA energized. Vibration along XYZ axes: Amplitude 1.5mm P-P, Sweep time 10-55-10Hz/min, Duration 2 hours each axis. | |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX | DC 1mA energized. 490m/s {50G}, 3 strokes in each of the 6 directions. | |
| Heat Resistance | - | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC, place in 852 air for 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | - | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC, place in -402 air for 96 hours, then return to room temperature for 1-2 hours. |
| Humidity Resistance | - | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Mate applicable FPC/FFC, place in 402, 90-95% RH air for 96 hours, measure within 0.5 hours after returning to room temperature. |
| Temperature Cycling | - | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 for 30 minutes, b) 852 for 30 minutes, with 10-15 minutes at room temperature between cycles. |
| Salt Spray Resistance | - | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX | 48 4 hours exposure to a salt spray from a 51% solution at 352. Wash with room temperature water after test and dry at room temperature. |
| SO2 Gas Resistance | - | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | - | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting | 95% wetting area | Immersion in a 2455 tin bath for 20.5 sec, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | 305 sec in a 2455 hot air furnace, at least 5 times. |
Part Number: 0.5-10P XJH2.0 043
Company Contact:
Shenzhen Shouhan Technology Co., Ltd.
Tel: 0755-27597601
Fax: 0755-27597491
2509030921_SHOU-HAN-0-5-10P-XJH2-0-043_C5373434.pdf
Send RFQ
Stock:
MOQ:
