1.0mm Pitch FPC FFC Connector SHOU HAN 1.0-4P CTSJ-H2.5 119 Designed for Flexible Flat Cable Interfaces
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 4 Position 1mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
4P
Pitch:
1mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
1.0-4P CTSJ-H2.5 119
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
1.0-4P CTSJ-H2.5 119
Introduction
Product Overview
This specification covers the 1.0mm Pitch FPC/FFC Connectors. Designed for reliable electrical connections, these connectors are suitable for a wide range of applications requiring flexible flat cable interfaces. They offer robust performance with defined electrical, mechanical, and environmental characteristics.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Material (Main body): LCP UL 94V-0
- Material (Locking Housing): LCP UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze
- Plating: Tin plated metal surface
Technical Specifications
| Item | Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC (Virtual value) 50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC (0.3mm thickness) at a speed of 253mm/minute. |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at a speed of 253mm/minute. |
| Terminal/Housing Retention Force | 0.25N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at a speed rate of less than 10 cycles/minute (without power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX. Appearance: No Damage. | DC 1mA energized state; Vibration along X, Y, Z axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each axis. |
| Shock | Appearance: No Damage; Discontinuity: 1 ms MAX. | DC 1mA energized state; 490m/s {50G} shock in 6 perpendicular directions; 3 strokes each. |
| Heat Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | Place in 852 air for 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | Place in -402 air for 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage; Contact Resistance: 60 m MIN; Dielectric Strength: Must meet 4.1.3; Insulation Resistance: 20 M MIN | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours. Measure within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Appearance: No Damage; Contact Resistance: 60 m MAX | 5 cycles of: a) -553 for 30 minutes; b) 852 for 30 minutes. (With 10-15 minutes at room temperature and humidity between cycles). |
| Salt Spray | Appearance: No Damage, No Corrosion; Contact Resistance: 60 m MAX | 244 hours exposure to a 51% salt spray solution at 352. Wash with room temperature water after test and dry at room temperature. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder Ability | Solder Wetting: 95% or more area coverage. | Soldering Time: 20.5 sec; Soldering Temperature: 2455; Immerse 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation. | Soldering Time: 305 sec; Soldering Temperature: 2455; Performed at least 5 times in a hot air oven. |
2509030922_SHOU-HAN-1-0-4P-CTSJ-H2-5-119_C5373485.pdf
Send RFQ
Stock:
MOQ:
