Robust Flexible Flat Cable Connector SHOU HAN 1.0-16P CTSJ-H2.5 119 with Metal Surface Tinned Plating
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 16 Position 1mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
16P
Pitch:
1mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
1.0-16P CTSJ-H2.5 119
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
1.0-16P CTSJ-H2.5 119
Introduction
Product Overview
The 1.0-16P CTSJ-H2.5 119 is a 1.0mm pitch Flexible Flat Cable (FFC) connector designed for reliable electrical and mechanical performance. It is suitable for applications requiring a secure connection for FFC/FPC cables, offering robust contact resistance, insulation resistance, and dielectric strength. The connector is built to withstand a range of environmental conditions, including temperature cycling, humidity, and corrosive gases, ensuring durability and consistent performance.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Material (Main body/Housing Lock): LCP UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze
- Plating: Metal surface tinned
Technical Specifications
| Item | Test Condition | Requirement |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | 0.5A | |
| Ambient temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of contacts) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 0.25N MIN |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute (no power). | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA under power. Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute. Duration: 2 hours in each X.Y.Z. axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. |
| Shock | DC 1mA under power. 490m/s2{50G}, 3 strokes in each X.Y.Z. axes. | Appearance: No Damage Discontinuity: 1 ms MAX. |
| Heat Resistance | 852, 96 hours, then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | -402, 96 hours, then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hour at room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes b) 852 30 minutes | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | 24 4 hours exposure to a salt spray from the 51% solution at 352. After test, wash with water at room temperature and dry. | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2455, 0.2 mm from terminal tip. | Solder Wetting: 95% or more |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455, at least 5 times. | Appearance: No Damage, Deformation |
2509030922_SHOU-HAN-1-0-16P-CTSJ-H2-5-119_C5373497.pdf
Send RFQ
Stock:
MOQ:
