Flat Cable Connector SHOU HAN FPC 0.5-12P HYH2.0 with Phosphor Bronze Terminals and Locking Mechanism
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 12 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
12P
Pitch:
0.5mm
Voltage Rating (Max):
50V
Contact Type:
双侧触点/上下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
FPC 0.5-12P HYH2.0
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
FPC 0.5-12P HYH2.0
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors from Shenzhen Shouhan Technology Co., Ltd. Designed for flexible flat cable connections, these connectors offer reliable electrical, mechanical, and environmental performance.
Product Attributes
- Brand: Shenzhen Shouhan Technology Co., Ltd.
- Origin: China
- Material: Main body and Housing Lock made of LCP (UL 94V-0), Terminals and Contacts made of Phosphor Bronze with tin plating.
Technical Specifications
| Item | Specification | Requirement |
|---|---|---|
| Product Name and Part Number | ||
| Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | FPC 0.5-12P HYH2.0 | |
| Material Code | ||
| Ratings | ||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Performance | ||
| Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1minute between adjacent terminal or ground. | No Breakdown |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC (0.3mm thickness) at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX, Withdrawal: 0.49*n (N) MIN |
| Terminal /Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 3.92N MIN |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load (UL 498). | 30 MAX |
| Vibration | DC 1mA under energized condition; vibration along X, Y, Z axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each axis. | Appearance: No Damage, Contact Resistance: 60 m MAX, Discontinuity: 1 ms MAX. |
| Shock | DC 1mA under energized condition; 490m/s{50G}, 3 strokes in each X, Y, Z axes. | Appearance: No Damage, Discontinuity: 1 ms MAX. |
| Heat Resistance | Mate applicable FPC/FFC; place in 852 air for 96 hours, then return to room temperature for 1-2 hours. | Appearance: No Damage, Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; place in -402 air for 96 hours, then return to room temperature for 1-2 hours. | Appearance: No Damage, Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC; place in 402, 90-95% RH air for 96 hours, then measure within 0.5 hours after returning to room temperature. | Appearance: No Damage, Contact Resistance: 60 m MAX, Dielectric Strength: Must meet 4.1.3, Insulation Resistance: 20 M MIN |
| Temperature Cycling | Mate applicable FPC/FFC; 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature between cycles. | Appearance: No Damage, Contact Resistance: 60 m MAX |
| Salt Spray | Mate applicable FPC/FFC; 48 4 hours exposure to a 51% salt spray solution at 352. Wash with room temperature water after test and dry at room temperature. | Appearance: No Damage, Corrosion, Contact Resistance: 60 m MAX |
| SO2 Gas Resistance | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas Resistance | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage, Contact Resistance: 60 m MAX |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2455 at 0.2 mm from terminal tip. | Solder Wetting: 95% or more area coverage. |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455 in a hot air furnace, at least 5 times. | Appearance: No Damage, Deformation. |
| Product Shape, Dimensions and Materials | ||
| Name | Material | Specification |
| Main body | LCP | UL 94V-0 |
| Housing Lock | LCP | UL 94V-0 |
| Terminal | Phosphor Bronze | Metal surface plated with tin |
| Contact | Phosphor Bronze | Metal surface plated with tin |
2509030923_SHOU-HAN-FPC-0-5-12P-HYH2-0_C6364660.pdf
Send RFQ
Stock:
MOQ:
