1.0mm Pitch FPC FFC Flat Cable Connector SHOU HAN 1.0-17P CTSJ-H2.5 119 Rated 50V and 0.5A Current
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 17 Position 1mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
17P
Pitch:
1mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
1.0-17P CTSJ-H2.5 119
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
1.0-17P CTSJ-H2.5 119
Introduction
Product Overview
This specification covers the 1.0mm Pitch FPC/FFC Connectors, designed for reliable electrical and mechanical performance. These connectors are suitable for applications requiring a 1.0mm pitch flexible flat cable connection, offering a rated voltage of 50V AC/DC and a rated current of 0.5A. They are built to operate within an ambient temperature range of -25 to +85 and have undergone rigorous testing for electrical, mechanical, and environmental resistance.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGYCO.,LTD
- Origin: Shenzhen, China
- Product Type: FFC/FPC Flat Cable Connector
- Material: Housing Lock (LCP UL 94V-0), Terminal/Contact (Phosphor Bronze with tin plating)
- Certifications: UL 94V-0
Technical Specifications
| Item | Requirement | Test Condition |
|---|---|---|
| RATINGS | ||
| Rated Voltage (MAX) | 50V [AC/DC (Virtual value) 50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminal or ground. |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at the speed rate of 253mm/minute. |
| Terminal / Housing Retention Force | 0.25N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at the speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. Appearance: No Damage | Amplitude: 1.5mm P-P. Sweep time: 10-55-10Hz in 1 minute. Duration: 2 hours in each X, Y, Z axes (with DC 1mA). |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX. | 490m/s {50G}, 3 strokes in each X, Y, Z axes (with DC 1mA). |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 852, 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | -402, 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hours at room temperature. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature between cycles. |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | 244 hours exposure to a salt spray from a 51% solution at 352. Post-test: wash with water at room temperature and dry. |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% or more | Soldering Time: 20.5 sec. Soldering Temperature: 2455 Immersion depth: 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455 Minimum 5 times. |
| PRODUCT SHAPE, DIMENSIONS AND MATERIALS | ||
| Main Body | LCP UL 94V-0 | Refer to drawing. |
| Housing Lock | LCP UL 94V-0 | Refer to drawing. |
| Terminal / Contact | Phosphor Bronze (Metal surface plated with tin) | Refer to drawing. |
Part No: 1.0-17P CTSJ-H2.5
Material Code: 119
2509030922_SHOU-HAN-1-0-17P-CTSJ-H2-5-119_C5373498.pdf
Send RFQ
Stock:
MOQ:
