Flat Cable Connector SHOU HAN 0.5-30P XJH2.0 043 FFC FPC Rated 30V 0.2A for Flexible Cable Solutions
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 30 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
30P
Pitch:
0.5mm
Voltage Rating (Max):
30V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
黄铜
Mfr. Part #:
0.5-30P XJH2.0 043
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
0.5-30P XJH2.0 043
Introduction
Product Overview
This specification covers the 0.5 mm Pitch FPC/FFC Connectors from Shenzhen Shouhan Technology Co., Ltd. These connectors are designed for applications requiring reliable connections for flexible flat cables. They are rated for a maximum voltage of 30V AC/DC and a maximum current of 0.2A, operating within an ambient temperature range of -25 to +85.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Name: FFC/FPC Flat Cable Connector
- Main Body Material: LCP UL 94V-0
- Housing Lock Material: LCP UL 94V-0
- Terminal/Contact Material: Phosphor Bronze
- Terminal Surface Finish: Plated Tin
Technical Specifications
| Item | Specification/Condition | Requirement |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 30V [AC/DC (virtual value) 50Hz] | - |
| Rated Current (MAX) | - | 0.2A |
| Ambient Temperature Range | - | -25+85 |
| Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 100 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 250V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of positions) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 0.4N MIN |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at a speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA energized state; vibration along XYZ axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes. | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX |
| Shock | DC 1mA energized state; 490m/s {50G} shock; 3 strokes in each X, Y, Z axes. | Appearance: No Damage Discontinuity: 1 ms MAX |
| Heat Resistance | Mate FPC/FFC; place in 852 air for 96 hours; return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | Mate FPC/FFC; place in -402 air for 96 hours; return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Mate FPC/FFC; place in 402, 90-95% RH air for 96 hours; measure within 0.5 hours after returning to room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes; with 10-15 minutes at room temperature between cycles. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | Mate FPC/FFC; 48 4 hours exposure to a salt spray from a 51% solution at 352. Wash with room temperature water after test; dry at room temperature. | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas Resistance | Mate FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas Resistance | Mate FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solder Ability | Terminal tip immersed in a 2455 tin bath for 20.5 sec, 0.2 mm from the terminal tip. | Solder Wetting: 95% or more coverage |
| Resistance to Soldering Heat | Conditions: 305 sec in a 2455 hot air oven, at least 5 times. | Appearance: No Damage, Deformation |
| Product Model: 0.5-30P XJH2.0 043 | - | - |
2509030922_SHOU-HAN-0-5-30P-XJH2-0-043_C5373440.pdf
Send RFQ
Stock:
MOQ:
