FFC connector SHOU HAN 0.5-60P CTSJ-H2.0 119 with LCP UL 94V-0 housing lock and tin plated terminals
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 60 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
60P
Pitch:
0.5mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
0.5-60P CTSJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
0.5-60P CTSJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors from Shenzhen Shouhan Technology Co., Ltd. These connectors are designed for flexible flat cable applications, offering reliable electrical and mechanical performance.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: China
- Main Body Material: LCP UL 94V-0
- Housing Lock Material: LCP UL 94V-0
- Terminal/Contact Material: Phosphor Bronze
- Terminal Surface Treatment: Tin Plated
Technical Specifications
| Item | Specification | Requirement |
|---|---|---|
| Product Name and Part Number | ||
| Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | CTSJ-H2.0 | 0.5-60P |
| Ratings | ||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Performance - Electrical Performance | ||
| Contact Resistance | Measured by dry circuit, 20mV MAX, 10mA, after mating applicable FPC/FFC | 30 m MAX |
| Insulation Resistance | Applied 500V DC between adjacent terminals or ground, after mating applicable FPC/FFC | 500 M MIN |
| Dielectric Strength | Applied 250V AC (Virtual value) for 1 minute between adjacent terminals or ground, after mating applicable FPC/FFC | No Breakdown |
| Performance - Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC (0.3mm thickness) at a speed of 253mm/minute | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at a speed of 25 3mm/minute | 0.25N MIN |
| Performance - Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | 20 cycles at a speed of less than 10 cycles/minute, without power | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load (UL 498) | 30 MAX |
| Vibration | Under DC 1mA, vibration along XYZ axes (10-55-10Hz/min, Amplitude 1.5mm P-P, 2 hours duration each axis) | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX |
| Shock | Under DC 1mA, 3 strokes in each X.Y.Z. axes (490m/s {50G}) | Discontinuity: 1 ms MAX |
| Heat Resistance | 96 hours at 852, then return to room temperature for 1-2 hours | Contact Resistance: 60 m MAX |
| Cold Resistance | 96 hours at -402, then return to room temperature for 1-2 hours | Contact Resistance: 60 m MAX |
| Humidity | 96 hours at 402, 90-95% RH, then measure within 0.5 hours at room temperature | Contact Resistance: 60 m MAX Insulation Resistance: 20 M MIN Dielectric Strength: Must meet 4.1.3 |
| Temperature Cycling | 5 cycles of -553 (30 min) and 852 (30 min), with 10-15 min transitions | Contact Resistance: 60 m MAX |
| Salt Spray | 244 hours exposure to 51% salt spray solution at 352, followed by washing and drying | Contact Resistance: 60 m MAX |
| SO2 Gas Resistance | 24 hours exposure to 505ppm SO2 gas at 402 | Contact Resistance: 60 m MAX |
| NH3 Gas Resistance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution | Contact Resistance: 60 m MAX |
| Solderability | Immersion in 2455 tin bath for 20.5 sec, 0.2 mm from terminal tip | Solder Wetting: 95% |
| Resistance to Soldering Heat | 305 sec in a 2455 hot air oven, at least 5 times | No Damage, Deformation |
2304120930_SHOU-HAN-0-5-60P-CTSJ-H2-0-119_C5373462.pdf
Send RFQ
Stock:
MOQ:
