0.3mm Pitch FPC Connector SHOU HAN 0.3-21P XGXJ-H1.0 with Phosphor Bronze Terminals and LCP Housing
Manufacturer:
SHOU HAN
Description:
Hinged Lid -25℃~+85℃ 21P Bottom Contact 0.6mm SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins) FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
21P
Contact Type:
下接
FFC, FCB Thickness:
0.2mm
Pitch:
0.6mm
Mfr. Part #:
0.3-21P XGXJ-H1.0
Package:
SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins)
Model Number:
0.3-21P XGXJ-H1.0
Introduction
Product Overview
This specification covers the 0.3mm Pitch FPC Connectors (FFC/FPC Flat Cable Connectors). Designed for reliable electrical and mechanical performance, these connectors are suitable for applications requiring a 0.3mm pitch interface. They are rated for a maximum voltage of 30V AC/DC and a maximum current of 0.2A, operating within an ambient temperature range of -25 to +85. The connectors are constructed with LCP (UL 94V-0) for the main body and housing lock, and Phosphor Bronze for terminals and contacts, with tin plating on metal surfaces.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Material (Main Body/Housing Lock): LCP (UL 94V-0)
- Material (Terminal/Contact): Phosphor Bronze
- Plating: Tin plating on metal surface
- Pitch: 0.3mm
Technical Specifications
| Category | Item | Test Condition | Requirement |
|---|---|---|---|
| Ratings | Rated Voltage (MAX) | 30V [AC/DC(effective value) 50Hz] | - |
| Rated Current (MAX) | - | 0.2A | |
| Ambient Temperature Range | - | -25 ~ +85 | |
| Electrical Performance | Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 40 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | 50M MIN | |
| Dielectric Strength | - | Mate applicable FPC/FFC and apply 250V AC (virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown |
| Mechanical Performance | Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (0.3mm thick FFC) | Locking: 0.15N MAX, Withdrawal: 0.08N MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 3.92N MIN | |
| Environmental Performance | Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX | |
| Vibration | - | DC 1mA energized state; vibrate along X, Y, Z axes; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours. | Appearance: No Damage, Contact Resistance: 60 m MAX, Discontinuity: 1 ms MAX |
| Shock | DC 1mA energized state; 490m/s {50G} impact in 6 directions perpendicular to the mating axis; 3 strokes each. | Appearance: No Damage, Discontinuity: 1 ms MAX | |
| Heat Resistance | Mate applicable FPC/FFC; place in 852 air for 96 hours; return to room temperature for 1-2 hours. | Appearance: No Damage, Contact Resistance: 60 m MAX | |
| Cold Resistance | Mate applicable FPC/FFC; place in -402 air for 96 hours; return to room temperature for 1-2 hours. | Appearance: No Damage, Contact Resistance: 60 m MAX | |
| Humidity | Mate applicable FPC/FFC; place in 402, 90-95% RH air for 96 hours; measure within 0.5 hours after returning to room temperature. | Appearance: No Damage, Contact Resistance: 60 m MAX, Dielectric Strength: Must meet 4.1.3, Insulation Resistance: 20 M MIN | |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes b) 852 30 minutes (with 10-15 minutes at room temp/humidity in between) | Appearance: No Damage, Contact Resistance: 60 m MAX | |
| Salt Spray | 48 4 hours exposure to a salt spray from the 51% solution at 352. Wash with room temperature water after test and dry at room temperature. | Appearance: No Damage, Corrosion, Contact Resistance: 60 m MAX | |
| SO2 Gas | 24 hours exposure to 50 5ppm SO2 gas at 402. | Contact Resistance: 60 m MAX | |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage, Contact Resistance: 60 m MAX | |
| Solderability | Soldering Ability | Soldering Time20.5 sec. Soldering Temperature2455. 0.2 mm from terminal tip. | - |
| Solder Wetting | - | Wetting Area: 95% | |
| Resistance to Soldering Heat | Soldering Time305 sec. Soldering Temperature2455. At least 5 times. | Appearance: No Damage, Deformation | |
| Product Name: FFC/FPC Flat Cable Connector Part Number: 0.3-21P XGXJ-H1.0 Material Code: 0.3-21P XGXJ-H1.0 | |||
2507031705_SHOU-HAN-0-3-21P-XGXJ-H1-0_C49287251.pdf
Send RFQ
Stock:
MOQ:
