Flexible Flat Cable Connector SHOU HAN 0.5-24P XJH2.0 043 Rated 30V AC DC and 0.2A Current
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 24 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
24P
Pitch:
0.5mm
Voltage Rating (Max):
30V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
黄铜
Mfr. Part #:
0.5-24P XJH2.0 043
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
0.5-24P XJH2.0 043
Introduction
Product Overview
This specification covers the 0.5 mm Pitch FPC/FFC Connectors from Shenzhen Shouhan Technology Co., Ltd. These connectors are designed for flexible flat cable applications and are suitable for use with FPC/FFC cables. They are rated for a maximum voltage of 30V AC/DC and a maximum current of 0.2A, operating within an ambient temperature range of -25 to +85.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGYCO.,LTD
- Origin: Shenzhen, China
- Product Type: FFC/FPC Flat Cable Connector
- Material (Main Body): LCP UL 94V-0
- Material (Housing Lock): LCP UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze
- Plating (Metal Surface): Tin Plated
Technical Specifications
| Category | Item | Condition / Test Method | Requirement |
|---|---|---|---|
| Ratings | Rated Voltage (MAX) | 30V [AC/DC (Virtual value) 50Hz] | |
| Rated Current (MAX) | 0.2A | ||
| Ambient Temperature Range | -25+85 | ||
| Electrical Performance | Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 100 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| Mechanical Performance | Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (For 0.3mm thick FFC) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 0.4N MIN | |
| Product Name | FFC/FPC Flat Cable Connector | ||
| Part Number | 0.5-24P XJH2.0 043 | ||
| Environmental Performance and Others | Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute (No power). | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX | |
| Vibration | DC 1mA energized state; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X.Y.Z. axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Shock | DC 1mA energized state; 490m/s{50G}, 3 strokes in each X.Y.Z. axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Heat Resistance | 852, 96 hours, then return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Cold Resistance | -402, 96 hours, then return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Humidity | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hours at room temperature. | Contact Resistance: 60 m MAX Insulation Resistance: 20 M MIN Dielectric Strength: Must meet 4.1.3 Appearance: No Damage | |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes b) 852 30 minutes | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Salt Spray | 48 4 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water and dry. | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion | |
| SO2 Gas | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX | |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Solder Ability | Soldering Time: 20.5 sec. Soldering Temperature: 2455, 0.2 mm from terminal tip. | Solder Wetting: 95% or more | |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455, at least 5 times. | Appearance: No Damage, Deformation |
2509030922_SHOU-HAN-0-5-24P-XJH2-0-043_C5373439.pdf
Send RFQ
Stock:
MOQ:
