Flexible Flat Cable Connector SHOU HAN 0.5-6P XJH2.0 043 with Low Contact Resistance and Insulation
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 6 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
6P
Pitch:
0.5mm
Voltage Rating (Max):
30V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
黄铜
Mfr. Part #:
0.5-6P XJH2.0 043
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
0.5-6P XJH2.0 043
Introduction
Product Overview
The 0.5mm Pitch FPC/FFC Connector by Shenzhen Shouhan Technology Co., Ltd. is designed for flexible flat cable applications. This connector offers reliable electrical and mechanical performance, suitable for a wide range of operating temperatures. It is engineered to meet stringent performance standards for contact resistance, insulation resistance, and dielectric strength, ensuring dependable connections in various electronic devices.
Product Attributes
- Brand: Shenzhen Shouhan Technology Co., Ltd.
- Origin: Shenzhen, China
- Product Name: FFC/FPC Flat Cable Connector
- Material (Main Body & Housing Lock): LCP UL 94V-0
- Material (Terminal & Contact): Phosphor Bronze (Tin plated surface)
Technical Specifications
| Item | Specification | Requirement |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 30V [AC/DC (Virtual value) 50Hz] | - |
| Rated Current (MAX) | 0.2A | - |
| Ambient Temperature Range | -25+85 | - |
| Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 100 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of contacts) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 0.4N MIN |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA energized; vibrate along XYZ axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X,Y,Z axes. | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX |
| Shock | DC 1mA energized; 490m/s {50G}, 3 strokes in each X,Y,Z axes. | Appearance: No Damage Discontinuity: 1 ms MAX |
| Heat Resistance | 852, 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | -402, 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours; then measure within 0.5 hours at room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes; with 10-15 minutes at normal temperature and humidity between cycles. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | 48 4 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water and dry. | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2455 Position: 0.2 mm from terminal tip. | Solder Wetting: 95% coverage |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455 Conditions: At least 5 times. | Appearance: No Damage, Deformation |
2509030921_SHOU-HAN-0-5-6P-XJH2-0-043_C5373432.pdf
Send RFQ
Stock:
MOQ:
