electrical connector SHOU HAN 0.5-38P CTSJ-H2.0 119 0.5 mm pitch for flexible flat cable applications
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 38 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
38P
Pitch:
0.5mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
0.5-38P CTSJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
0.5-38P CTSJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5 mm Pitch FFC/FFC Connectors, designed for flexible flat cable applications. These connectors offer reliable electrical and mechanical performance, suitable for a wide operating temperature range and various environmental conditions. They are engineered for durability and consistent performance through repeated insertions and withdrawals, as well as resistance to vibration, shock, heat, cold, and humidity.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO., LTD
- Part Number: CTSJ-H2.0
- Origin: Shenzhen, China
- Certifications: UL 94V-0 (for LCP materials)
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC (Virtual value) 50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminals or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at a speed rate of 253mm/minute. |
| Terminal/Housing Retention Force | 0.25N MIN | Pull the terminal at a speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute, without power. |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. Appearance: No Damage | DC 1mA energized. Vibration along XYZ axes: Amplitude 1.5mm P-P, Sweep time 10-55-10Hz/min, Duration 2 hours in each axis. |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX. | DC 1mA energized. 490m/s {50G}, 3 strokes in each of the 6 directions. |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC, placed in 852 air for 96 hours, then returned to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC, placed in -402 air for 96 hours, then returned to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Mate applicable FPC/FFC, placed in 402, 90-95% RH air for 96 hours, measured within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 for 30 minutes, b) 852 for 30 minutes, with 10-15 minutes at room temperature between cycles. |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | 244 hours exposure to a 51% salt spray solution at 352. After test, wash with room temperature water and dry. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% or more coverage | Soldering Time: 20.5 sec. Soldering Temperature: 2455 at 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455 in a hot air furnace, at least 5 times. |
| Product Shape, Dimensions and Materials | ||
| Name | Materials | Remarks |
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal/Contact | Phosphor Bronze | Metal surface plated with tin |
2303211800_SHOU-HAN-0-5-38P-CTSJ-H2-0-119_C5373459.pdf
Send RFQ
Stock:
MOQ:
