FFC FPC flat cable connector SHOU HAN 0.5-50P CTSJ-H2.0 119 suitable for flexible cable connections
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 50 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
50P
Pitch:
0.5mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
0.5-50P CTSJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
0.5-50P CTSJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5 mm Pitch FPC/FFC Connectors. Designed for flexible flat cable connections, these connectors offer reliable electrical and mechanical performance within a specified temperature range. They are suitable for applications requiring secure locking and withdrawal forces, with robust resistance to environmental factors like vibration, shock, heat, cold, and humidity.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Type: FFC/FPC Flat Cable Connector
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Category | Item | Specification/Requirement | Test Condition |
|---|---|---|---|
| Ratings | Rated Voltage (MAX) | 50V AC/DC (Virtual value, 50Hz) | |
| Rated Current (MAX) | 0.5A | ||
| Ambient Temperature Range | -25+85 | ||
| Electrical Performance | Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminal or ground. | |
| Mechanical Performance | Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at the speed rate of 253mm/minute. |
| Terminal/Housing Retention Force | 0.25N MIN | Pull the terminal at the speed rate of 25 3mm per minute. | |
| Environmental Performance and Others | Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). | |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | Amplitude: 1.5mm P-P. Sweep time: 10-55-10Hz/minute. Duration: 2 hours in each X, Y, Z axes (DC 1mA current). | |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX | 490m/s {50G}, 3 strokes in each X, Y, Z axes (DC 1mA current). | |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Place in 852 air for 96 hours, then return to room temperature for 1-2 hours. | |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Place in -402 air for 96 hours, then return to room temperature for 1-2 hours. | |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 hours. Measure within 0.5 hours after returning to room temperature. | |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes. | |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | 244 hours exposure to a salt spray from a 51% solution at 352. Wash with room temperature water and dry after test. | |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. | |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| Solderability | Solder Wetting | 95% or more coverage | Soldering Time: 20.5 sec. Soldering Temperature: 2455 at 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455. Perform at least 5 times. | |
| Product Name and Part Number | Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | CTSJ-H2.0 | ||
| Product Shape, Dimensions and Materials | Refer to drawing | ||
| Main Body (LCP, UL 94V-0) | |||
| Housing Lock (LCP, UL 94V-0) | |||
| Terminal/Contact (Phosphor Bronze, Metal surface plated with tin) |
2303211800_SHOU-HAN-0-5-50P-CTSJ-H2-0-119_C5373461.pdf
Send RFQ
Stock:
MOQ:
