FFC FPC Flat Cable Connector SHOU HAN 0.5-40P CTSJ-H2.0 119 for Industrial Electronic Applications
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 40 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
40P
Pitch:
0.5mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
0.5-40P CTSJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
0.5-40P CTSJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors from Shenzhen Shouhan Technology Co., Ltd. These connectors are designed for flexible flat cable applications, offering reliable electrical and mechanical performance within a specified operating temperature range. They are suitable for various industrial and electronic applications requiring secure and stable connections.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: China
- Product Type: FFC/FPC Flat Cable Connector
- Materials:
- Main Body: LCP UL 94V-0
- Housing Lock: LCP UL 94V-0
- Terminal/Contact: Phosphor Bronze (Metal surface tinned)
Technical Specifications
| Item | Specification/Condition | Requirement |
|---|---|---|
| [2] PRODUCT NAME AND PART NUMBER | ||
| Product Name | FFC/FPC Flat Cable Connector | - |
| Part Number | CTSJ-H2.0 | 0.5-40P |
| [3] RATINGS | ||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | - | 0.5A |
| Ambient Temperature Range | - | -25+85 |
| [4] PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (For 0.3mm thick FFC) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 0.25N MIN |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute (No power). | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA energized state; vibration along XYZ three axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X,Y,Z axes. | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. |
| Shock | DC 1mA energized state; 490m/s {50G} shock in 6 mutually perpendicular directions; 3 strokes each. | Appearance: No Damage Discontinuity: 1 ms MAX. |
| Heat Resistance | Mate applicable FPC/FFC; placed in 852 air for 96 hours; then returned to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; placed in -402 air for 96 hours; then returned to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC; placed in 402, 90-95% RH air for 96 hours; measured within 0.5 hours after returning to room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes; with 10-15 minutes at room temperature between cycles. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | Mate applicable FPC/FFC; 244 hours exposure to a salt spray from the 51% solution at 352. After test, rinse with room temperature water and dry. | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas Resistance | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas Resistance | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2455 Position: 0.2 mm from terminal tip | Solder Wetting: 95% or more coverage |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455 Condition: At least 5 times in a 2455 hot air furnace. | Appearance: No Damage, Deformation |
2303211800_SHOU-HAN-0-5-40P-CTSJ-H2-0-119_C5373460.pdf
Send RFQ
Stock:
MOQ:
