Flexible Flat Cable Connector SHOU HAN 0.5-6P CTSJ-H2.0 119 with Phosphor Bronze Tin Plated Contacts
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 6 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
6P
Pitch:
0.5mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
0.5-6P CTSJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
0.5-6P CTSJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5 mm Pitch FPC/FFC Connectors manufactured by Shenzhen Shouhan Technology Co., Ltd. These connectors are designed for flexible flat cable applications, offering reliable electrical and mechanical performance within a specified temperature range.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Type: FFC/FPC Flat Cable Connector
- Material (Main Body): LCP UL 94V-0
- Material (Housing Lock): LCP UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze
- Surface Treatment: Metal surface tin-plated
Technical Specifications
| Item | Specification | Requirement |
|---|---|---|
| Product Name and Part Number | ||
| Product Name | FFC/FPC Flat Cable Connector | - |
| Part Number | CTSJ-H2.0 | 0.5-6P |
| Ratings | ||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | - | 0.5A |
| Ambient Temperature Range | - | -25+85 |
| Performance - Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500 M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| Performance - Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 0.25N MIN |
| Performance - Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA energized state; vibration along XYZ three directions; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. |
| Shock | DC 1mA energized state; 490m/s {50G} shock in 6 mutually perpendicular directions; 3 times each. | Appearance: No Damage Discontinuity: 1 ms MAX. |
| Heat Resistance | Mate applicable FPC/FFC; placed in 852 air for 96 hours; then returned to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; placed in -402 air for 96 hours; then returned to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC; placed in 402, 90-95% RH air for 96 hours; measured within 0.5 hours after returning to room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes b) 852 30 minutes | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | Mate applicable FPC/FFC; 244 hours exposure to a salt spray from a 51% solution at 352. Post-test wash with room temperature water and dry at room temperature. | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solder ability | Soldering Time: 20.5 sec. Soldering Temperature: 2455. 0.2 mm from terminal tip. | Solder Wetting: 95% or more coverage area. |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455. At least 5 times. | Appearance: No Damage, Deformation |
2303211800_SHOU-HAN-0-5-6P-CTSJ-H2-0-119_C5373443.pdf
Send RFQ
Stock:
MOQ:
