FFC FPC Flat Cable Connector SHOU HAN 1.0-30P CTSJ-H2.5 119 with Rated Voltage 50V and Current 0.5A
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 30 Position 1mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
30P
Pitch:
1mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
1.0-30P CTSJ-H2.5 119
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
1.0-30P CTSJ-H2.5 119
Introduction
Product Overview
This specification covers the 1.0mm Pitch FPC/FFC Connectors, designed for flexible flat cable applications. These connectors offer reliable electrical and mechanical performance, suitable for a wide operating temperature range.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Material (Main body & Housing Lock): LCP UL 94V-0
- Material (Terminal & Contact): Phosphor Bronze
- Surface Treatment: Tin plated metal
Technical Specifications
| Item | Specification | Requirement |
|---|---|---|
| Product Name and Part Number | ||
| Product Name | FFC/FPC Flat Cable Connector | 1.0-30P CTSJ-H2.5 119 |
| Material Code | 1.0-30P CTSJ-H2.5 119 | |
| Ratings | ||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Performance | ||
| Electrical Performance | Contact Resistance | 30 m MAX (Mate applicable FPC/FFC, dry circuit, 20mV MAX, 10mA) |
| Insulation Resistance | 500 M MIN (Mate applicable FPC/FFC, 500V DC between adjacent terminals or ground) | |
| Dielectric Strength | 250V AC (Virtual value) for 1 minute between adjacent terminals or ground (No Breakdown) | |
| Mechanical Performance | Locking and Withdrawal Force (for 0.3mm thick FFC) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN (Speed: 253mm/minute) |
| Terminal / Housing Retention Force | 0.25N MIN (Pull outward at speed of 25 3mm/minute) | |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Cycles | 20 cycles (Max 10 cycles/minute) |
| Contact Resistance | 60 m MAX | |
| Temperature Rise | Carrying rated current load (UL 498) | 30 MAX |
| Vibration | Test Condition | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X,Y,Z axes (DC 1mA) |
| Contact Resistance | 60 m MAX | |
| Discontinuity | 1 ms MAX | |
| Shock | Test Condition | 490m/s {50G}, 3 strokes in each X,Y,Z axes (DC 1mA) |
| Discontinuity | 1 ms MAX | |
| Heat Resistance | Test Condition | 852, 96 hours, then return to room temp for 1-2 hours |
| Contact Resistance | 60 m MAX | |
| Cold Resistance | Test Condition | -402, 96 hours, then return to room temp for 1-2 hours |
| Contact Resistance | 60 m MAX | |
| Humidity | Test Condition | 402, 90-95% RH, 96 Hours, then measure within 0.5 hours at room temp |
| Contact Resistance | 60 m MAX | |
| Insulation Resistance | 20 M MIN | |
| Dielectric Strength | Must meet 4.1.3 | |
| Temperature Cycling | Test Condition | 5 cycles of: a) -553 30 minutes b) 852 30 minutes (with 10-15 min transition) |
| Contact Resistance | 60 m MAX | |
| Salt Spray | Test Condition | 244 hours exposure to 51% salt spray solution at 352, followed by water wash and drying |
| Contact Resistance | 60 m MAX | |
| SO2 Gas Resistance | Test Condition | 24 hours exposure to 505ppm SO2 gas at 402 |
| Contact Resistance | 60 m MAX | |
| NH3 Gas Resistance | Test Condition | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution |
| Contact Resistance | 60 m MAX | |
| Solder Ability | Soldering Time/Temperature | 20.5 sec at 2455 (0.2 mm from terminal tip) |
| Solder Wetting | 95% or more wetting area | |
| Resistance to Soldering Heat | Soldering Time/Temperature | 305 sec at 2455 (at least 5 times) |
2509030922_SHOU-HAN-1-0-30P-CTSJ-H2-5-119_C5373504.pdf
Send RFQ
Stock:
MOQ:
