FFC FPC Flat Cable Connector SHOU HAN 0.5-22P CTXJ-H2.0 119 with Rated Voltage 50V and Current 0.5A
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 22 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
22P
Pitch:
0.5mm
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
0.5-22P CTXJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
0.5-22P CTXJ-H2.0 119
Introduction
Product Overview
The 0.5mm Pitch FPC/FFC Connectors from SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD are designed for flexible flat cable connections. These connectors are suitable for a wide range of applications requiring reliable electrical and mechanical performance within specified environmental conditions. They offer a compact design with robust performance characteristics, including specific ratings for voltage, current, and operating temperature.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: China
- Product Type: FFC/FPC Flat Cable Connector
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V AC/DC (Virtual value, 50Hz) | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of contacts) |
| Terminal/Housing Retention Force | 0.25N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | DC 1mA under power. Amplitude: 1.5mm P-P. Sweep time: 10-55-10Hz in 1 minute. Duration: 2 hours in each X, Y, Z axes. |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX | DC 1mA under power. 490m/s {50G}, 3 strokes in each X, Y, Z axes. |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 852, 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | -402, 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hours at room temperature. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes. (With intermediate 10-15 minutes at normal temperature and humidity) |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | 244 hours exposure to a salt spray from a 51% solution at 352. Wash with water and dry at room temperature after test. |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% or more | Soldering Time: 20.5 sec. Soldering Temperature: 2455. 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455. At least 5 times. |
| Product Shape, Dimensions and Materials | ||
| Name | Material | Remark |
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal | Phosphor Bronze | Metal surface tinned |
| Contact | Phosphor Bronze | Metal surface tinned |
2303211800_SHOU-HAN-0-5-22P-CTXJ-H2-0-119_C5373476.pdf
Send RFQ
Stock:
MOQ:
