FFC FPC Connector SHOU HAN 0.5-7P CTSJ-H2.0 119 Operating Temperature Range Minus 25 to 85 Degrees
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors manufactured by Shenzhen Shouhan Technology Co., Ltd. These connectors are designed for flexible flat cable applications and are suitable for use within a wide temperature range of -25 to +85, with a maximum rated voltage of 50V AC/DC and a maximum rated current of 0.5A.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Type: FFC/FPC Flat Cable Connector
- Materials:
- Main body: LCP UL 94V-0
- Housing Lock: LCP UL 94V-0
- Terminal/Contact: Phosphor Bronze (Surface plated with tin)
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC (effective value) 50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Performance | ||
| Electrical Performance | Contact Resistance | 30 m MAX (Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA) |
| Insulation Resistance | 500 M MIN (Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground) | |
| Dielectric Strength | No Breakdown (Mate applicable FPC/FFC and apply 250V AC (effective value) for 1 minute between adjacent terminal or ground) | |
| Mechanical Performance | Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN (Insert and extract applicable FFC at the speed rate of 253mm/minute) |
| Terminal/Housing Retention Force | 0.25N MIN (Pull the terminal at the speed rate of 25 3mm per minute) | |
| Environmental Performance and Others | Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX (Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute) |
| Temperature Rise | 30 MAX (Carrying rated current load. (UL 498)) | |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX (Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X.Y.Z. axes, DC 1mA applied) | |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX (490m/s{50G}, 3 strokes in each X.Y.Z. axes, DC 1mA applied) | |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX (852, 96 hours) | |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX (-402, 96 hours) | |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN (Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours) | |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX (5 cycles of: a) -553 30 minutes, b) 852 30 minutes) | |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX (24 4 hours exposure to a salt spray from the 51% solution at 352) | |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX (24 hours exposure to 505ppm. SO2 gas at 402) | |
| NH3 Gas Resistance | Appearance: No Damage Contact Resistance: 60 m MAX (40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution) | |
| Solderability | Solder Wetting: 95% or more (Soldering Time: 20.5 sec, Soldering Temperature: 2455, 0.2 mm from terminal tip) | |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation (Soldering Time: 305 sec, Soldering Temperature: 2455) | |
Product Model: 0.5-7P CTSJ-H2.0
Part Number: 0.5-7P CTSJ-H2.0 119
Contact Information: Tel: 0755-27597601, Fax: 0755-27597491
2303211800_SHOU-HAN-0-5-7P-CTSJ-H2-0-119_C5373444.pdf