Flexible Flat Cable Connector SHOU HAN 0.5-4P CTSJ-H2.0 119 Offering Insulation and Dielectric Strength
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 4 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
4P
Pitch:
0.5mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
0.5-4P CTSJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
0.5-4P CTSJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5 mm Pitch FPC/FFC Connectors from Shenzhen Shouhan Technology Co., Ltd. These connectors are designed for flexible flat cable applications, offering reliable electrical and mechanical performance within a specified temperature range. They are suitable for various environmental conditions and meet stringent performance criteria for contact resistance, insulation resistance, and dielectric strength.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Type: FFC/FPC Flat Cable Connector
- Certifications: UL 94V-0 (for LCP materials)
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC (Virtual value) 50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminals or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at a speed of 253mm/minute. |
| Terminal/Housing Retention Force | 0.25N MIN | Pull the terminal at a speed of 25 3mm/minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. | Under DC 1mA, vibration along XYZ axes: Amplitude 1.5mm P-P, Sweep time 10-55-10Hz/min, Duration 2 hours in each axis. |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX. | Under DC 1mA, 490m/s {50G}, 3 strokes in each of 6 directions. |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Place in 852 air for 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Place in -402 air for 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Place in 402, 90-95% RH air for 96 hours, then measure within 0.5 hours at room temperature. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: -553 for 30 mins, then 852 for 30 mins, with 10-15 mins at room temp between cycles. |
| Salt Spray | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX | 244 hours exposure to 51% salt spray at 352. Wash with room temp water and dry. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% or more | Dip 0.2mm from terminal tip into 2455 tin bath for 20.5 sec. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | 5 cycles of 305 sec exposure to 2455 hot air. |
| Product Shape, Dimensions and Materials | ||
| Component | Material | Remark |
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal | Phosphor Bronze | Metal surface plated with tin |
| Contact | Phosphor Bronze | Metal surface plated with tin |
Part Number: CTSJ-H2.0 119
Product Name: FFC/FPC Flat Cable Connector
2303211800_SHOU-HAN-0-5-4P-CTSJ-H2-0-119_C5373442.pdf
Send RFQ
Stock:
MOQ:
