0.5mm Pitch FPC FFC Connector SHOU HAN 0.5-16P CTSJ-H2.0 119 Suitable for Industrial and Electronics
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 16 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
16P
Pitch:
0.5mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
0.5-16P CTSJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
0.5-16P CTSJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors from Shenzhen Shouhan Technology Co., Ltd. Designed for flexible flat cable applications, these connectors offer reliable electrical and mechanical performance within a wide operating temperature range. They are suitable for various industrial and electronic applications requiring secure and stable connections.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Type: FFC/FPC Flat Cable Connector
- Material - Main Body: LCP UL 94V-0
- Material - Housing Lock: LCP UL 94V-0
- Material - Terminal/Contact: Phosphor Bronze (Surface plated with tin)
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC (Virtual value) 50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (For 0.3mm thick FFC) |
| Terminal/Housing Retention Force | 0.25N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute (No power). |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. | DC 1mA energized; Vibration along XYZ axes, Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X,Y,Z axes. |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX. | DC 1mA energized; 490m/s {50G}, 3 strokes in each X,Y,Z axes. |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC; Placed in 852 air for 96 hours, then returned to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC; Placed in -402 air for 96 hours, then returned to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Insulation Resistance: 20 M MIN Dielectric Strength: Must meet 4.1.3 | Temperature: 402, Relative Humidity: 90-95%; Duration: 96 Hours. Measured within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes. (With intermediate periods at room temperature). |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | 244 hours exposure to a 51% salt spray solution at 352. After test, wash with room temperature water and dry. |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder Ability | Solder Wetting: 95% or more coverage | Soldering Time: 20.5 sec. Soldering Temperature: 2455 (0.2 mm from terminal tip) |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455 (At least 5 times) |
| Product Name and Part Number | ||
| Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | CTSJ-H2.0 | |
| Pitch | 0.5mm | |
| Number of Positions | 16P | |
2303211800_SHOU-HAN-0-5-16P-CTSJ-H2-0-119_C5373451.pdf
Send RFQ
Stock:
MOQ:
