FPC FFC Connector SHOU HAN 1.0-24P CTXJ-H2.5 119 Designed for Electrical Contact and Mechanical Strength
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 24 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
24P
Pitch:
1mm
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
1.0-24P CTXJ-H2.5 119
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
1.0-24P CTXJ-H2.5 119
Introduction
Product Overview
The SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD 1.0-24P CTXJ-H2.5 119 is a 1.0mm Pitch FPC/FFC Connector designed for flexible flat cable applications. It offers reliable electrical performance with specific ratings for voltage and current, and operates within a defined temperature range. This connector is engineered to meet stringent mechanical and environmental performance standards, ensuring durability and consistent performance through repeated use, vibration, shock, and various environmental conditions including heat, cold, humidity, and corrosive gases.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Name: FFC/FPC Flat Cable Connector
- Material Code: 1.0-24P CTX FPC J-H2.5 119
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Specification | Requirement |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 250V AC (virtual value) for 1 minute between adjacent terminal or ground | No Breakdown |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. 0.3mm thick FFC. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal / Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 0.25N MIN |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load (UL 498) | 30 MAX |
| Vibration | DC 1mA under power. Vibration along XYZ axes. Amplitude: 1.5mm P-P. Sweep time: 10-55-10Hz/min. Duration: 2 hours in each X.Y.Z. axes. | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX |
| Shock | DC 1mA under power. 490m/s {50G}, 3 strokes in each X.Y.Z. axes. | Appearance: No Damage Discontinuity: 1 ms MAX |
| Heat Resistance | Mate applicable FPC/FFC. Placed in 852 air for 96 hours, then returned to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC. Placed in -402 air for 96 hours, then returned to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC. Placed in 402, 90-95% RH air for 96 hours, then measured within 0.5 hours at room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes b) 852 30 minutes. With 10-15 minutes at room temp/humidity between cycles. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | Mate applicable FPC/FFC. 244 hours exposure to a salt spray from the 51% solution at 352. Post-test washing with water at room temperature and drying. | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas | Mate applicable FPC/FFC. 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | Mate applicable FPC/FFC. 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2455. 0.2 mm from terminal tip. | Solder Wetting: 95% or more |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455. Performed at least 5 times in a 2455 hot air oven. | Appearance: No Damage, Deformation |
| Product Shape, Dimensions and Materials | ||
| Name | Materials | Remark |
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal | Phosphor Bronze | Metal surface plated with tin |
| Contact | Phosphor Bronze | Metal surface plated with tin |
2509030922_SHOU-HAN-1-0-24P-CTXJ-H2-5-119_C5373522.pdf
Send RFQ
Stock:
MOQ:
