Flexible flat cable connector SHOU HAN 1.0-13P CTSJ-H2.5 119 with phosphor bronze tin plated terminals
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 13 Position 1mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
13P
Pitch:
1mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
1.0-13P CTSJ-H2.5 119
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
1.0-13P CTSJ-H2.5 119
Introduction
Product Overview
This product specification covers 1.0mm Pitch FPC/FFC Connectors. These connectors are designed for use with flexible flat cables and are suitable for a wide range of environmental conditions and electrical performance requirements. They are manufactured by Shenzhen Shouhan Technology Co., Ltd.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Main Body Material: LCP UL 94V-0
- Housing Lock Material: LCP UL 94V-0
- Terminal/Contact Material: Phosphor Bronze
- Terminal Surface Finish: Tin Plated
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V AC/DC (50Hz, Virtual Value) | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (Virtual Value) for 1 minute between adjacent terminals or ground. |
| Mechanical Performance | ||
| Locking Force (MAX) | 1.96*n (N) | Insert and extract applicable FFC (0.3mm thickness) at the speed rate of 253mm/minute. |
| Withdrawal Force (MIN) | 0.49*n (N) | Insert and extract applicable FFC (0.3mm thickness) at the speed rate of 253mm/minute. |
| Terminal/Housing Retention Force (MIN) | 0.25N | Pull the terminal at the speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. | DC 1mA under power. Vibration along X, Y, Z axes: Amplitude 1.5mm P-P, Sweep time 10-55-10Hz/min, Duration 2 hours in each axis. |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX. | DC 1mA under power. 490m/s{50G}, 3 strokes in each of 6 directions. |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 96 hours at 852, then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 96 hours at -402, then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | 96 hours at 402, 90-95% RH, then measured within 0.5 hours at room temperature. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: -553 for 30 minutes, then 852 for 30 minutes, with 10-15 minutes at room temp/humidity between cycles. |
| Salt Spray | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX | 244 hours exposure to salt spray (51% solution) at 352. Washed with water and dried at room temperature after test. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% or more | Soldering Time: 20.5 sec. Soldering Temperature: 2455. Measured at 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455. Performed at least 5 times. |
Product Details
Product Name: FFC/FPC Flat Cable Connector
Part Number: 1.0-13P CTSJ-H2.5 119
Material Code: 1.0-13P CTSJ-H2.5 119
Applicable Scope: 1.0mm Pitch FPC/FFC Connectors
Drawing Reference: Refer to the drawing.
2509030922_SHOU-HAN-1-0-13P-CTSJ-H2-5-119_C5373494.pdf
Send RFQ
Stock:
MOQ:
