Flexible Flat Cable Connector SHOU HAN 1.0-12P CTSJ-H2.5 119 with Tin Plated Phosphor Bronze Contacts
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 12 Position 1mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
12P
Pitch:
1mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
1.0-12P CTSJ-H2.5 119
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
1.0-12P CTSJ-H2.5 119
Introduction
Product Overview
This specification covers the 1.0mm Pitch FPC/FFC Connectors from Shenzhen Shouhan Technology Co., Ltd. Designed for flexible flat cable applications, these connectors offer reliable electrical and mechanical performance within a specified temperature range. They are suitable for various industrial and electronic applications requiring secure and stable connections.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Material (Main body/Locking Housing): LCP UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze
- Surface Treatment: Tin plated
Technical Specifications
| Item | Requirement | Test Condition |
|---|---|---|
| Product Name and Part Number | ||
| Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | 1.0-12P CTSJ-H2.5 119 | |
| Ratings | ||
| Rated Voltage (MAX) | 50V (AC/DC virtual value, 50Hz) | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Performance - Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (virtual value) for 1 minute between adjacent terminals or ground. |
| Performance - Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at a speed of 253mm/minute. |
| Terminal/Housing Retention Force | 0.25N MIN | Pull the terminal at a speed of 25 3mm per minute. |
| Performance - Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. | DC 1mA applied. Vibration along X, Y, Z axes: Amplitude 1.5mm P-P, Sweep 10-55-10Hz/min, Duration 2 hours in each axis. |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX. | DC 1mA applied. 490m/s {50G}, 3 strokes in each of 6 directions. |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Place in 852 air for 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Place in -402 air for 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours. Measure within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: -553 for 30 minutes, then 852 for 30 minutes, with 10-15 minutes at normal temperature and humidity between cycles. |
| Salt Spray | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX | 244 hours exposure to a 51% salt spray solution at 352. Wash with room temperature water and dry at room temperature after testing. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% or more coverage | Immersion in a 2455 tin bath for 20.5 sec, 0.2 mm from the terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | Conditions: 305 sec in a 2455 hot air oven, at least 5 times. |
2509030922_SHOU-HAN-1-0-12P-CTSJ-H2-5-119_C5373493.pdf
Send RFQ
Stock:
MOQ:
