Durable Flexible Flat Cable Connector SHOU HAN 1.0-6P CTSJ-H2.5 119 Featuring Low Contact Resistance
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
6P
Pitch:
1mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
1.0-6P CTSJ-H2.5 119
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
1.0-6P CTSJ-H2.5 119
Introduction
Product Overview
The 1.0mm Pitch FPC/FFC Connector is designed for flexible flat cable applications. This connector offers reliable electrical and mechanical performance, suitable for a wide operating temperature range and various environmental conditions. It is engineered for durability, featuring robust contact resistance, insulation resistance, and dielectric strength.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Material (Main Body/Housing Lock): LCP UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze (Tin Plated)
Technical Specifications
| Category | Item | Specification/Requirement | Test Condition |
|---|---|---|---|
| Ratings | Rated Voltage (MAX) | 50V (AC/DC, Virtual value, 50Hz) | |
| Rated Current (MAX) | 0.5A | ||
| Ambient Temperature Range | -25+85 | ||
| Electrical Performance | Contact Resistance | 30 m MAX | Mate applicable FPC/FFC, open circuit voltage 20mV, short circuit current 10mA |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC, apply 500V DC between adjacent terminals or ground | |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC, apply 250V AC (Virtual value) for 1 minute between adjacent terminals or ground | |
| Mechanical Performance | Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Mate 0.3mm thick FFC, speed 253mm/minute, parallel insertion/extraction |
| Terminal/Housing Retention Force | 0.25N MIN | Pull terminal outwards parallel at speed of 25 3mm/minute | |
| Environmental Performance | Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | 20 cycles at speed < 10 cycles/minute, no power |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498) | |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X,Y,Z axes, DC 1mA energized | |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX | 490m/s {50G}, 3 strokes in each X,Y,Z axes, DC 1mA energized | |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 96 hours at 852, then 1-2 hours at room temperature | |
| Environmental Performance (cont.) | Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 96 hours at -402, then 1-2 hours at room temperature |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Insulation Resistance: 20 M MIN Dielectric Strength: Must meet 4.1.3 | 96 hours at 402, 90-95% RH, measured within 0.5 hours at room temperature | |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: -553 for 30 min, then 852 for 30 min, with transitions | |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | 244 hours exposure to 51% salt spray at 352, followed by washing and drying | |
| Environmental Performance (cont.) | SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402 |
| NH3 Gas Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas from 28% Ammonia solution | |
| Soldering Performance | Solderability | Wetting Area: 95% | Immersion at 2455 for 20.5 sec, 0.2mm from terminal tip |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | 5 cycles of 305 sec in hot air at 2455 | |
| Product Code | 1.0-6P CTSJ-H2.5 119 | ||
| Product Name | FFC/FPC Flat Cable Connector | ||
| Part Number | 1.0-6P CTSJ-H2.5 119 |
2509030922_SHOU-HAN-1-0-6P-CTSJ-H2-5-119_C5373487.pdf
Send RFQ
Stock:
MOQ: