flexible flat cable connector SHOU HAN 1.0-16P XGXJ-H2.0 suitable for various electronic applications
Manufacturer:
SHOU HAN
Description:
Hinged Lid -25℃~+85℃ 16P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
16P
Contact Type:
下接
FFC, FCB Thickness:
0.3mm
Pitch:
1mm
Mfr. Part #:
1.0-16P XGXJ-H2.0
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
1.0-16P XGXJ-H2.0
Introduction
Product Overview
This specification covers the 1.0mm Pitch FPC Connectors, designed for flexible flat cable connections. These connectors are suitable for various applications requiring reliable electrical and mechanical performance. They are manufactured by Shenzhen Shouhan Technology Co., Ltd. and are compliant with industry standards for performance and environmental resistance.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Name: FFC/FPC Flat Cable Connector
- Part Number: 1.0-16P XGXJ-H2.0
- Material Code: 1.0-16P XGXJ-H2.0
- Certifications/Standards: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V (AC/DC, virtual value, 50Hz) | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25 ~ +85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (virtual value) for 1 minute between adjacent terminals or ground. |
| Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC (0.3mm thickness) at a speed of 253mm/minute. |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at a speed of 253mm/minute. |
| Terminal/Housing Retention Force | 0.25N MIN | Pull the terminal outwards at a speed of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed of less than 10 cycles/minute, without power. |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX. | Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes; DC 1mA energized. |
| Shock | Appearance: No Damage; Discontinuity: 1 ms MAX. | 490m/s {50G}, 3 strokes in each X, Y, Z axes; DC 1mA energized. |
| Heat Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | 852, 96 hours; then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | -402, 96 hours; then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage; Contact Resistance: 60 m MAX; Dielectric Strength: Must meet 4.1.3; Insulation Resistance: 20 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 hours; then measured within 0.5 hours at room temperature. |
| Temperature Cycling | Appearance: No Damage; Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes; with 10-15 minutes at normal temperature and humidity between cycles. |
| Salt Spray | Appearance: No Damage, Corrosion; Contact Resistance: 60 m MAX | 48 4 hours exposure to a salt spray from a 51% solution at 352; followed by washing with room temperature water and drying. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 50 5ppm SO2 gas at 402. |
| NH3 Gas Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% or more coverage area | Soldering Time: 20.5 sec; Soldering Temperature: 2455; 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 305 sec; Soldering Temperature: 2455; at least 5 times. |
| Product Shape, Dimensions and Materials | ||
| Main Body | LCP UL 94V-0 | Subject to the drawing. |
| Housing Lock | LCP UL 94V-0 | Subject to the drawing. |
| Terminal | Phosphor Bronze | Subject to the drawing. Metal surface plated with tin. |
| Contact | Phosphor Bronze | Subject to the drawing. Metal surface plated with tin. |
2509030921_SHOU-HAN-1-0-16P-XGXJ-H2-0_C49287261.pdf
Send RFQ
Stock:
MOQ:
