Durable SHOU HAN FPC 0.5-26P HYH2.0 connector with tin plated metal surface finish and LCP housing lock
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 26 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
26P
Pitch:
0.5mm
Voltage Rating (Max):
50V
Contact Type:
双侧触点/上下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
FPC 0.5-26P HYH2.0
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
FPC 0.5-26P HYH2.0
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors from Shenzhen Shouhan Technology Co., Ltd. These connectors are designed for flexible flat cable applications, offering reliable electrical and mechanical performance.
Product Attributes
- Brand: Shenzhen Shouhan Technology Co., Ltd. (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
- Origin: China
- Product Type: FFC/FPC Flat Cable Connector
- Material: LCP (UL 94V-0) for Main body and Housing Lock, Phosphor Bronze for Terminal and Contact
- Surface Finish: Tin plated metal
Technical Specifications
| Item | Specification / Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V AC/DC (Virtual value 50Hz) | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at the speed rate of 253mm/minute. |
| Terminal / Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX Appearance: No Damage | Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X, Y, Z axes (DC 1mA applied). |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX | 490m/s {50G}, 3 strokes in each X, Y, Z axes (DC 1mA applied). |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 852, 96 hours, then return to room temperature for 1-2 hours (FPC/FFC mated). |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | -402, 96 hours, then return to room temperature for 1-2 hours (FPC/FFC mated). |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours, then measured within 0.5 hours at room temperature (FPC/FFC mated). |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes; with 10-15 minutes at room temp/humidity between cycles (FPC/FFC mated). |
| Salt Spray | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX | 48 4 hours exposure to a 51% salt spray solution at 352. After test, rinse with room temp water and dry. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402 (FPC/FFC mated). |
| NH3 Gas Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution (FPC/FFC mated). |
| Solderability | Solder Wetting: 95% coverage | Soldering Time: 20.5 sec. Soldering Temperature: 2455 at 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455 (at least 5 times). |
| Product Name and Part Number | ||
| Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | 0.5-26P HYH2.0 | |
| Material Code | ||
Note: Refer to drawing for Product Shape, Dimensions, and Materials.
2509030923_SHOU-HAN-FPC-0-5-26P-HYH2-0_C6364667.pdf
Send RFQ
Stock:
MOQ:
