SHOU HAN 0.8-15PWT connector needle holder featuring clean surface free from cracks dirt and mechanical damage
This specification covers the production and inspection of Shenzhen Shouhan Technology Co., Ltd.'s ordinary series type strip connectors (needle holders). These connectors are designed for use within a temperature range of -25 to +85, accommodating wire sizes from AWG#28 to #32 and PC board thicknesses of 1.2 to 1.6 mm. They feature a surface free from defects, dirt, cracks, and mechanical damage, with contacts free from rust and plating oxidation or peeling. The connectors are designed for interchangeability with products of the same specification.
Product Attributes
- Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
- Origin: (Shenzhen)
- Certifications: UL94V-0 (for Housing and Plastic Shell materials)
Technical Specifications
| Part No. | Description | Material | Finish | Electrical Performance | Mechanical Performance | Environmental Performance |
|---|---|---|---|---|---|---|
| 0.8-15PWT | Connector (Needle Holder) | Terminal: Phosphor bronze (0.15mm thick) Housing: Nylon66 (White) | Terminal: Tin Plating (3-4 m) Housing: N/A | Rated Voltage: 30V AC/DC Rated Current: 0.5A AC/DC Contact Resistance: 20m Insulation Resistance: 100M Dielectric Strength: 500V AC/minute | Female Contact Retention Force: 0.5N per pin Male Contact Retention Force (PIN): 0.5N per pin Plug-in Force: 3N per pin Plug-out Force: 10N per pin Endurance: 10N per pin | Soldering Resistance: Time: 2.50.5S, Temp: 2605, Soldering Area: 95% Heat Resistance: Time: 96h, Temp: +853, Appearance: No Damage, Contact Resistance: 20m Cold Test: Time: 48h, Temp: -253, Appearance: No Damage, Contact Resistance: 20m Temperature Cycling: 5 cycles (-25 to +85), Appearance: No Damage, Contact Resistance: 20m Constant Humidity: Time: 96h, Temp: 602, RH: 90%-96%, Appearance: No Damage, Contact Resistance: 20m, Insulation Resistance: 100M Salt Spray: Conc: 51%, Temp: 352, Time: 162h, Appearance: No Damage, Contact Resistance: 20m |
| Opening Wafer (Plastic Shell) | Contact: Phosphor bronze (0.30mm thick) Plastic Shell: Nylon46 (Beige) | Tin Plating (3-4 m) | ||||
| Lips Wafer (Plastic Shell) | Contact: Phosphor bronze (0.30mm thick) Plastic Shell: PBT (White) | Gold Plating (3-4 m) | ||||
| Tiepian Wafer (Vertical Mount Needle Holder) | Contact: Phosphor bronze (0.30mm thick) Plastic Shell: Nylon46 (Beige) | Tin Plating (3-4 m) | ||||
| Tiepian Wafer (Horizontal Mount Needle Holder) | Contact: Phosphor bronze (0.30mm thick) Solder tabs: Phosphor bronze (0.25mm thick) Plastic Shell: Nylon46 (Beige) | Tin Plating (3-4 m) |
Packaging, Transportation, and Storage
Packaging: Inner packaging uses plastic bags for plastic parts and panel mounting materials for terminals, with a certificate of conformity. Outer packaging is a carton with a packing list. Products must not move within the box.
Transportation: Allows for any transportation method, but must be protected from moisture and mechanical damage.
Storage: Store in a warehouse with ambient temperature between -10 to +40, relative humidity 80%, and free from acidic, alkaline, or other corrosive gases.
2407261043_SHOU-HAN-0-8-15PWT_C33960157.pdf
