Flexible Flat Cable Connector SHOU HAN 1.0-20P XGXJ-H2.0 with Phosphor Bronze Contacts and Tin Plated Surface
Manufacturer:
SHOU HAN
Description:
Hinged Lid -25℃~+85℃ 20P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
20P
Contact Type:
下接
FFC, FCB Thickness:
0.3mm
Pitch:
1mm
Mfr. Part #:
1.0-20P XGXJ-H2.0
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
1.0-20P XGXJ-H2.0
Introduction
Product Overview
This specification covers the 1.0mm Pitch FPC Connectors designed for flexible flat cable connections. These connectors are suitable for various applications requiring reliable electrical and mechanical performance under a range of environmental conditions. Key features include low contact resistance, high insulation resistance, and robust mechanical strength, making them ideal for industrial and electronic applications.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD ()
- Product Name: FFC/FPC (FFC/FPC Flat Cable Connector)
- Material: Main body: LCP UL 94V-0, Housing Lock: LCP UL 94V-0, Terminal/Contact: Phosphor Bronze
- Surface Treatment: Tin plated ()
- Origin: Shenzhen, China
Technical Specifications
| Item | Specification / Condition | Requirement |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25 ~ +85 | |
| Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 250V AC (virtual value) for 1 minute between adjacent terminal or ground. No Breakdown. | No Breakdown |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of positions) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 0.25N MIN |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA in energized state; Vibration along XYZ axes; Amplitude: 1.5mm P-P; Frequency sweep: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. |
| Shock | DC 1mA in energized state; 490m/s {50G} shock; 3 strokes in each X, Y, Z axes. | Appearance: No Damage Discontinuity: 1 ms MAX. |
| Heat Resistance | Mate applicable FPC/FFC; Place in 852 air for 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; Place in -402 air for 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC; Place in 402, 90-95% RH air for 96 hours; measure within 0.5 hours after returning to room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes; with 10-15 minutes at room temperature and humidity between cycles. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | Mate applicable FPC/FFC; 48 4 hours exposure to a 51% salt spray solution at 352. Wash with room temperature water after test and dry. | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas | Mate applicable FPC/FFC; 24 hours exposure to 50 5ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2455 Position: 0.2 mm from terminal tip | Solder Wetting: 95% minimum coverage area |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455 Conditions: At least 5 times in a 2455 hot air furnace. | Appearance: No Damage, No Deformation |
| Product Model/Part Number | 1.0-20P XGXJ-H2.0 | |
| Product Code | 1.0-20P XGXJ-H2.0 | |
| Dimensions | Refer to drawing | Subject to the drawing |
2509030921_SHOU-HAN-1-0-20P-XGXJ-H2-0_C49287263.pdf
Send RFQ
Stock:
MOQ:
