Flexible Flat Cable Connector SHOU HAN 1.0-18P CTSJ-H2.5 119 1.0mm Pitch with Mechanical Performance
Manufacturer:
SHOU HAN
Description:
FFC/FPC Connector 18 Position 1mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
18P
Pitch:
1mm
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
1.0-18P CTSJ-H2.5 119
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
1.0-18P CTSJ-H2.5 119
Introduction
Product Overview
The 1.0mm Pitch FPC/FFC Connector is designed for flexible flat cable applications. This connector offers reliable electrical and mechanical performance, suitable for a wide range of operating temperatures and environmental conditions. It is engineered for secure mating with FPC/FFC cables and ensures stable connections through various performance tests including contact resistance, insulation resistance, and dielectric strength.
Product Attributes
- Brand: SHOUHAN TECHNOLOGY
- Origin: Shenzhen, China
- Material (Main body/Housing Lock): LCP UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze
- Plating: Metal surface tinned
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V AC/DC (Virtual value 50Hz) | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC, open voltage 20mV MAX, short circuit current 10mA |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC, apply 500V DC between adjacent terminals or ground |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC, apply 250V AC (Virtual value) for 1 minute between adjacent terminals or ground |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable 0.3mm thick FFC at speed of 253mm/minute |
| Terminal/Housing Retention Force | 0.25N MIN | Pull terminal at speed of 25 3mm/minute |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | 20 cycles at speed less than 10 cycles/minute (no power) |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498) |
| Vibration | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | DC 1mA, Amplitude 1.5mm P-P, Sweep 10-55-10Hz/min, 2 hours in each X,Y,Z axes |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX | DC 1mA, 490m/s {50G}, 3 strokes in each X,Y,Z axes |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 852, 96 hours, then return to room temp 1-2 hours |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | -402, 96 hours, then return to room temp 1-2 hours |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | 402, 90-95% RH, 96 hours, then measure within 0.5 hours at room temp |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: -553 (30 min), 852 (30 min), with 10-15 min at room temp between cycles |
| Salt Spray | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX | 244 hours exposure to 51% salt spray at 352, followed by washing and drying |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402 |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas from 28% Ammonia solution |
| Solderability | Solder Wetting: 95% or more | Immersion in 2455 tin bath for 20.5 sec, 0.2 mm from terminal tip |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | 305 sec in hot air oven at 2455, at least 5 times |
2509030922_SHOU-HAN-1-0-18P-CTSJ-H2-5-119_C5373499.pdf
Send RFQ
Stock:
MOQ:
