Durable SHOU HAN 2.0-4PLTDK connector suitable for AWG28 to 32 wire sizes and PC board thickness 06 to 12 millimeters
Manufacturer:
SHOU HAN
Description:
Connector Header 4 position 2mm Pitch 2A Surface Mount,Vertical -25℃~+85℃
Category:
Free Hanging, Panel Mount/Headers, Male Pins
Specifications
Reference Series:
HY
Pins Structure:
1x4P
Contact Material:
铜合金;LCP
Color:
米色
Flame Retardant Rating:
UL94V-0
Number Of Rows:
1
Supplementary Features:
-
Mounting Type:
立贴
Pitch:
2mm
Number Of PINs:
4P
Operating Temperature:
-25℃~+85℃
Number Of PINs Per Row:
4
Contact Plating:
锡
Current Rating:
2A
Voltage Rating (Max):
250V
Mfr. Part #:
2.0-4PLTDK
Package:
SMD,P=2mm
Model Number:
2.0-4PLTDK
Introduction
Product Overview
This specification covers the production and inspection of Connector, specifically the 2.0-4P LTDK series. It is designed for use with wire sizes AWG#28~#32 and PC board thicknesses of 0.6~1.2mm. The connector offers reliable electrical and mechanical performance under various environmental conditions.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Certifications: RoHS Compliant
Technical Specifications
| Item | Requirement | ||||
| 1. SCOPE | |||||
| 1.1 This specification covers production and inspection of Connector. | |||||
| 2. USE CONDITION | |||||
| Ambient temperature Range | -25+85 | -25+85 | |||
| Applicable Wire Sizes | AWG#28#32 | AWG#28#32 | |||
| Applicable PC board thickness | PC | 0.6~1.2 mm | 0.6~1.2 mm | ||
| 3. Appearance and Dimension | |||||
| Appearance | Product surface without defectdirtcrackand mechanical damang, Contact without rust,plating not oxided and not peeled. | ||||
| Dimension | According to drawings | ||||
| Exchangable | Exchangable with same specification products. | ||||
| 4. Material | |||||
| P/N | Type | Material | Finish | Explain | |
| Terminal | Phosphor bronze | 0.15mm Tin Plating:3~4m | 3~4m | ||
| Housing | Plastic Nylon66 UL94V-0 | Color:White | |||
| Contact | Phosphor bronze | 0.30mm Tin Plating:3~4m | 3~4m | ||
| Opening Wafer | Plastic Nylon66 UL94V-0 | Color:White | |||
| Contact | Phosphor bronze | 0.30mm Gold Plating:3~4m | 3~4m | ||
| Lips Wafer | Plastic PBT UL94V-0 | Color: White | |||
| Contact | Phosphor bronze | 0.30mm Tin Plating:3~4m | 3~4m | ||
| Solder tabs | Phosphor bronze | 0.25mm Tin Plating:3~4m | 3~4m | ||
| Tiepian Wafer | Plastic Nylon46 UL94V-0 | Color: Beige | |||
| 5. Electrical Performance | |||||
| No. | Item | Requirement | |||
| 5.1 | Voltage Rated | 250V AC DC | |||
| 5.2 | Current Rated | 2A | |||
| 5.3 | Contact Resistance | 55 m | |||
| 5.4 | Insulation Resistance | 1000 M | |||
| 5.5 | Dielectric Strength | 800V AC/minute | |||
| 6. Mechanical Performance | |||||
| No. | Item | Requirement | |||
| 6.1 | Male contact Retention force | 15N per pin | |||
| 6.2 | Female contact Retention force | 15N per pin | |||
| 6.3 | Plug-in force | 3N per pin | |||
| 6.4 | Plug-out force | 0.5N per pin | |||
| 7. Endurance Characteristics | |||||
| No. | Item | Requirement | |||
| 7.1 | Soldering rest | Time:2.50.5S, Temperature:2605, Area of Soldering: 95% | 2.50.5S, 2605, 95% | ||
| 7.2 | Resistance to soldering Heat | Time:51S, Temperature:2605, Appearance:N0 Damage | :51S, 2605, | ||
| 7.3 | Heat test | Time:96h, Temperature:+853, Appearance:N0 Damage, Contact resistance: 20 m | 96 , +853, , 20 m | ||
| 7.4 | Cold test | Time:48h, Temperature:-253, Appearance:N0 Damage, Contact resistance: 20 m | 48 , -253, , 20 m | ||
| 7.5 | Temperature Cycling | Low temperature:-253, High temperature:853, For 5 cycles.test after keeping in Normal Condition for 30 min. Appearance: N0 Damage, Contact resistance: 20 m | -253, 853, 5 30 , , 20 m | ||
| 7.6 | lnvariab lenes humidity | Temperature:602, Relative humidity:90%-96% RH, Tim:96h, Appearance:N0 Damage, Contact resistance: 20 m, lnsulation Resistance: 100M | 602, 90%-96% RH, 96 , , 20 m, 100 M | ||
| 7.7 | Salt Spray | Salt concentration: 51%, Temperature:352, Tim:162h, Appearance:N0 Damage, Contact resistance: 20 m | 51%, 352, 162 , , 20 m | ||
| 8. Packaging Transportation Storage | |||||
| 8.1 Packaging | |||||
| (1) The packing of plastic inner is the plastic bag,the packing of inner terminal is panel mounting attach material packing, marked with product name, specification model, quantity, date in produced. | |||||
| (2) Exterior package is carton, facing the packing list, the packing list marked with product name, specificcation model, quantity, date of dispatch. | |||||
| (3) The product in the box must not rock. | |||||
| 8.2 Transportation | |||||
| Allow for any way transportation, cant get wet and mechanical in jury. | |||||
| 8.3 Storage | |||||
| The connector of packing finished should be in the ambient temperature between-10 to+40, Relative humidity80%. To store in storehouse does not have acidic, alkaline air and other corrosive gas in the ambient air. | |||||
2508281150_SHOU-HAN-2-0-4PLTDK_C3008559.pdf
Send RFQ
Stock:
MOQ:
