pin header connectors SHOU HAN 0.8-3PLT suitable for PCB thickness 1.2 to 1.6 millimeters and AWG28 to 32
Product Overview
This specification covers the production and inspection of connectors. This specification content is applicable to the production and inspection of our company's ordinary series type strip connectors (pin headers). Applicable wire sizes range from AWG#28 to #32, and applicable PC board thickness is 1.2~1.6mm. The product surface should be free from defects, dirt, cracks, and mechanical damage. Contacts should be free from rust, plating oxidation, or peeling. Dimensions are according to drawings. Products of the same specification should be interchangeable.
Product Attributes
- Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
- Origin: Shenzhen, China
- Certifications: RoHS Compliant
Technical Specifications
| Part Name | Type | Material | Finish | Specification | Color | Use Condition | Electrical Performance | Mechanical Performance | Environmental Performance |
|---|---|---|---|---|---|---|---|---|---|
| Terminal | Contact | Phosphor bronze (0.15mm thick) | Tin Plating: 3~4 m | - | - | Ambient temperature: -25~+85 | Rated Voltage: 30V AC/DC Rated Current: 0.5A Contact Resistance: 20m Insulation Resistance: 100M Dielectric Strength: 500V AC/minute | Female contact Retention force: 10N per pin Plug-in force: 3N per pin Plug-out force: 0.5N per pin | Soldering rest: Area of Soldering: 95% (Time: 2.50.5S, Temperature: 2605) |
| Housing | Plastic | Nylon66 | - | UL94V-0 | White | - | - | - | - |
| Opening Wafer | Contact | Phosphor bronze (0.30mm thick) | Tin Plating: 3~4 m | - | - | - | - | Male contact Retention force: 10N per pin | Resistance to soldering Heat: Appearance: No Damage (Time: 51S, Temperature: 2605) |
| Opening Wafer | Plastic | Nylon46 | - | UL94V-0 | Beige | - | - | - | Heat test: Appearance: No Damage, Contact resistance: 20 m (Time: 96h, Temperature: +853) |
| Lips Wafer | Contact | Phosphor bronze (0.30mm thick) | Gold Plating: 3~4 m | - | - | - | - | - | Cold test: Appearance: No Damage, Contact resistance: 20 m (Time: 48h, Temperature: -253) |
| Lips Wafer | Plastic | PBT | - | UL94V-0 | White | - | - | - | Temperature Cycling: Appearance: No Damage, Contact resistance: 20 m (Low temp: -253, High temp: 853, 5 cycles) |
| Tiepian Wafer | Contact | Phosphor bronze (0.30mm thick) | Tin Plating: 3~4 m | - | - | - | - | - | lnvariablenes humidity: Appearance: No Damage, Contact resistance: 20 m, Insulation Resistance: 100 M (Temperature: 602, Relative humidity: 90%-96% RH, Time: 96h) |
| Tiepian Wafer | Solder tabs | Phosphor bronze (0.25mm thick) | Tin Plating: 3~4 m | - | - | - | - | - | Salt Spray: Appearance: No Damage, Contact resistance: 20 m (Salt concentration: 51%, Temperature: 352, Time: 162h) |
| Tiepian Wafer | Plastic | Nylon46 | - | UL94V-0 | Beige | - | - | - | - |
Packaging, Transportation, Storage
Packaging: Inner plastic packaging is a plastic bag, terminal inner packaging is panel mounting material packaging, marked with product name, specification model, quantity, and production date. Exterior packaging is a carton, with a packing list marked with product name, specification model, quantity, and dispatch date. Products in the box must not rock.
Transportation: Allow for any way transportation, cannot get wet and mechanical injury.
Storage: Packaged connectors should be stored in a warehouse with ambient temperature between -10 to +40, relative humidity 80%, and no acidic, alkaline, or other corrosive gases in the ambient air.
2407261043_SHOU-HAN-0-8-3PLT_C33960160.pdf
