Connector compatible with AWG28 to 32 wires and PC board thickness 06 to 12mm SHOU HAN 2.0-2PWTDK model
Product Overview
This specification covers the production and inspection of the Connector. It is designed for general series type strip connectors (pin headers) with a 2.0-2P WTDK model. The product is suitable for use in a temperature range of -25 to +85 and can accommodate wire sizes from AWG#28 to #32, with PC board thicknesses of 0.6 to 1.2mm. It is designed for interchangeability with products of the same specification.
Product Attributes
- Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
- Origin: Shenzhen, China
- Certifications: RoHS Compliant
Technical Specifications
| Item | Requirement | Details |
|---|---|---|
| Applicable Wire Sizes | AWG#28#32 | |
| Applicable PC board thickness | 0.6~1.2 mm | |
| Appearance | Product surface without defect, dirt, crack, and mechanical damage. Contact without rust, plating not oxidized and not peeled. | |
| Dimension | According to drawings | |
| Interchangeability | Exchangable with same specification products | |
| Material - Terminal (Contact) | Phosphor bronze (0.15mm thick) | Tin Plating: 3~4m |
| Material - Housing (Plastic) | Nylon66 UL94V-0 | Color: White |
| Material - Contact (Pin) | Phosphor bronze (0.30mm thick) | Tin Plating: 3~4m |
| Material - Housing (Opening Wafer) | Nylon46 UL94V-0 | Color: Beige |
| Material - Contact (Pin) | Phosphor bronze (0.30mm thick) | Gold Plating: 3~4m |
| Material - Housing (Lips Wafer) | PBT UL94V-0 | Color: White |
| Material - Contact (Pin) | Phosphor bronze (0.30mm thick) | Tin Plating: 3~4m |
| Material - Solder tabs | Phosphor bronze (0.25mm thick) | Tin Plating: 3~4m |
| Material - Housing (Tiepian Wafer) | Nylon46 UL94V-0 | Color: Beige |
| Rated Voltage | 250V AC DC | |
| Rated Current | 2A AC DC | |
| Contact Resistance | 55 m | |
| Insulation Resistance | 1000 M | |
| Dielectric Strength | 800V AC/minute | |
| Male contact Retention force (PIN) | 15N per pin | |
| Female contact Retention force (Terminal) | 15N per pin | |
| Plug-in force | 3N per pin | |
| Plug-out force | 0.5N per pin | |
| Soldering rest (Solderability) | Time: 2.50.5S, Temperature: 2605, Area of Soldering: 95% | |
| Resistance to soldering Heat | Time: 51S, Temperature: 2605, Appearance: No Damage | |
| Heat test | Time: 96h, Temperature: +853, Appearance: No Damage, Contact resistance: 20 m | |
| Cold test | Time: 48h, Temperature: -253, Appearance: No Damage, Contact resistance: 20 m | |
| Temperature Cycling | 5 cycles (Low temp: -253, High temp: 853), Appearance: No Damage, Contact resistance: 20 m | Test after keeping in Normal Condition for 30 min. |
| Constant Humidity | Temperature: 602, Relative humidity: 90%-96% RH, Time: 96h, Appearance: No Damage, Contact resistance: 20 m, Insulation Resistance: 100M | |
| Salt Spray | Concentration: 51%, Temperature: 352, Time: 162h, Appearance: No Damage, Contact resistance: 20 m | After salt is removed by running wafer and a drop is removed, it is measured. |
| Packaging | Plastic inner bag, panel mounting attach material packing for terminals. Exterior carton with packing list. Product must not rock in box. | Marked with product name, specification model, quantity, date. |
| Transportation | Allow for any way transportation, cant get wet and mechanical injury. | |
| Storage | Ambient temperature: -10 to +40, Relative humidity 80%. Store in warehouse without acidic, alkaline air and other corrosive gas. |
2508281150_SHOU-HAN-2-0-2PWTDK_C3008562.pdf