Durable type C interface connector SHOU HAN TYPE-C 16P DG2.5 with 16 pin DG2.5 specification
Manufacturer:
SHOU HAN
Description:
16P SMD USB, DVI, HDMI Connector Adapters RoHS
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Adapters
Specifications
Number Of Contacts:
16P
Length:
8mm
Mounting Type:
卧贴
Connector Type:
Type-C
Voltage Rating:
20V
Detection Color:
黑色
Gender:
母
Number Of Ports:
1
Connect-Disconnect Life:
1万次
Mfr. Part #:
TYPE-C 16P DG2.5
Package:
SMD
Model Number:
TYPE-C 16P DG2.5
Introduction
Product Overview
This document outlines the specifications for the TYPE-C 16P DG2.5 connector, manufactured by Shenzhen Shouhan Technology Co., Ltd. It details the product's electrical, mechanical, and durability characteristics, designed for reliable performance under various environmental conditions. The connector is suitable for applications requiring a Type-C interface with 16 pins and a DG2.5 specification.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Name: TYPE-C
- Model/Part Number: TYPE-C 16P DG2.5
- Material Code: TYPE-C 16P DG2.5
Technical Specifications
| Category | Item | Test Conditions | Performance/Specification |
|---|---|---|---|
| RATING | Voltage | N/A | 20V |
| Current | N/A | 5A | |
| ENVIRONMENTAL | Practical Temperature Range | N/A | -30C ~ 80C |
| Standard Atmospheric Conditions (Measurement) | N/A | Temperature: 5C to 35C Humidity: 45% to 85% Pressure: 86Kpa to 106Kpa | |
| MECHANICAL | Connection Force | After connecting and disconnecting using standard plug gauge 3 times | 0.5 ~ 2.0 Kgf |
| Disconnection Force | After connecting and disconnecting using standard plug gauge 3 times | 0.8 ~ 2.0 Kgf | |
| MECHANICAL | Terminal Strength | Static load of 0.1N/m (1kgf/cm) applied to terminal tip for 1 min in any direction | No damage to terminal (cracks, looseness, play); electrical and mechanical characteristics satisfied. |
| ELECTRICAL | Contact Resistance | Measured at small current (100mA or less), 1000Hz | 40m MAX |
| Insulation Resistance | Apply 100V DC for 1 min between specified portions | 100M MIN | |
| Dielectric Strength | AC 100V rms (50~60Hz) for 1 min, trip current: 0.5mA, between specified portions | No damage, arcing, or breakdown | |
| DURABILITY | Solderability Test | Terminal top dipped 1mm in solder bath at 2505 for 50.5 seconds | Solder wetting time: 3 sec; Soldering area: > 75% |
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180 for 120s; Peak temp: 2605 within 20s | No deformation of case or excessive looseness of terminals; electrical characteristics satisfied. | |
| DURABILITY | Resistance to Soldering Heat Test (Soldering Iron) | Bit temp: 3305, application time: 30.5 sec (no excessive pressure) | No deformation of case or excessive looseness of terminals; electrical characteristics satisfied. |
| DURABILITY | Humidity Test | Stored at 402 and 90%-96% humidity for 96 Hr, then 1 Hr at standard atmospheric conditions | No damage on appearance; mechanical and electrical characteristics satisfied. |
| DURABILITY | Heat Test | Stored at 702 for 96 hours, then recovered at room temperature for 1 hour | No damage on appearance; mechanical and electrical characteristics satisfied. |
| DURABILITY | Cold Test | Stored at -253 for 96 hours, then recovered at room temperature for 1 hour | No damage on appearance; mechanical and electrical characteristics satisfied. |
| DURABILITY | Life Test | (1) Without Load: 10000 cycles at 10-25 cycles/min | Contact Resistance: 0.1 |
| (2) Load: At rating condition (non-inductive load): 10000 cycles at 10-20 cycles/min | Disconnection Force: 0.8 to 2.0N | ||
| Other: Mechanical and electrical characteristics satisfied. | |||
| ENVIRONMENTAL | Temperature Cycling Test | 5 cycles of specified temperature profile (80C to -40C) | No deformation or cracks in molded part. |
| Insertion & Extraction Force: 3 to 20N | |||
| Contact Resistance: Max. 30m | |||
| Insulation Resistance: Min. 100 M Dielectric Withstanding Voltage: 100VAC/min (between terminals) | |||
| ENVIRONMENTAL | Cold & Heat Shock Test | 5 cycles of specified temperature profile (70C to -20C) | No deformation or cracks in molded part. |
| Insertion & Extraction Force: 3 to 25N | |||
| Contact Resistance: Max. 30m | |||
| Insulation Resistance: Min. 100 M Dielectric Withstanding Voltage: 500VAC/min (between terminals) |
2507031705_SHOU-HAN-TYPE-C-16P-DG2-5_C49287220.pdf
Send RFQ
Stock:
MOQ:
