SHOU HAN TYPE-C 6P CB1.6 073 connector featuring low contact resistance and strong connection force
Manufacturer:
SHOU HAN
Description:
USB-C (USB TYPE-C) Receptacle Connector 6 Position Recessed Mount
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Number Of Ports:
1
Number Of Contacts:
6P
Mounting Type:
沉板
Current Rating:
5A
Voltage Rating:
5V
Detection Color:
黑色
Operating Temperature:
-25℃~+85℃
Connector Type:
Type-C
Connect-Disconnect Life:
1万次
Gender:
母
Mfr. Part #:
TYPE-C 6P CB1.6(073)
Package:
SMD
Model Number:
TYPE-C 6P CB1.6(073)
Introduction
Product Overview
This document outlines the specifications for the TYPE-C 6P CB1.6(073) connector from Shenzhen Shouhan Technology Co., Ltd. It details the product's electrical, mechanical, and durability characteristics, designed for reliable performance within a specified temperature range.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Model: TYPE-C 6P CB1.6(073)
- Origin: Shenzhen, China
- Rating: DC5V 3A
- Operating Temperature Range: -30~80C
Technical Specifications
| Item | Project | Test Conditions | Performance/Specification |
|---|---|---|---|
| Mechanical | Connection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 0.5-2.0Kgf |
| Disconnection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 0.8~2.0Kgf | |
| Electrical | Contact Resistance | Measured at small current (100mA or less) 1000Hz | 50m MAX |
| Electrical | Insulation Resistance | Apply a voltage of 100V DC for 1 min to following portions: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100M MIN |
| Electrical | Dielectric Strength | AC 100V rms(50~60Hz) for 1 min, Trip current: 0.5mA. Tested between: (1) Body and conductor (2) Conductors not to be contact (3) Conductors not to be when plug is inserted | Without damage to parts, arcing or breakdown etc. |
| Durability | Solderability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. | (1) Solder wetting time shall be 3 seconds or less. (2) The area of soldering should be over 75%. |
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180, 120s. Peak temperature: 2605 within 20 seconds. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| Durability | Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305, application time 30.5 seconds. No excessive pressure on terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| Durability | Humidity Test | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | Appearance no abnormality. Mechanical and electrical characteristics shall be satisfied. |
| Durability | Heat Test | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 Hr. | Appearance no abnormality. Mechanical and electrical characteristics shall be satisfied. |
| Durability | Cold Test | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 Hr. | Appearance no abnormality. Mechanical and electrical characteristics shall be satisfied. |
| Durability | Life Test (Without Load) | Connection and disconnection for 5000 cycles at a speed of 10 to 25 cycles/min. | - |
| Life Test (With Load) | At rating condition (non-inductive load), connection and disconnection for 5000 cycles at a speed of 10 to 20 cycles/min. | (1) Contact resistance 0.1 (2) Disconnection force 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. | |
| Durability | Temperature Cycling Test | 5 cycles of specified temperature conditions, then allowed to remain in room ambient condition for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| Durability | Cold & Heat Shock Test | 5 cycles of specified temperature conditions, then allowed to remain in room ambient condition for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
2512151750_SHOU-HAN-TYPE-C-6P-CB1-6-073_C2858274.pdf
Related Products
Micro USB Connector with 3000 Connect-Disconnect Life, Gold Plated Contacts, and Nickel Plated Shell for High Durability
USB-Micro B Receptacle Connector 5 Position Recessed Mount
IPX8 Waterproof USB Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Durable Performance
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle
IPX8 Waterproof Type-C Connector with 6P Contacts and 3A Current Rating for Harsh Environments
USB-C (USB TYPE-C) Receptacle Connector 6 Position Recessed Mount
Durable USB Connector Type-A with DC 30V 1.5A Rating 5000 Connect-Disconnect Life and -25℃~+85℃ Operating Temperature
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
SHOU HAN MICRO 6.4ZB5.0 Micro-B Connector with 5P Contacts, 1A Current Rating, and 3000 Connect-Disconnect Life for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Mini-B USB Connector with 10P Contacts, 5000 Connect-Disconnect Life, and 30V 1A Rating for Reliable Electronic Devices
USB-Mini B Receptacle Connector 10 Position Surface Mount, Right Angle
Durable Type-C 6P Connector with 5000 Mating Cycles, 3A Current Rating, and LCP UL94 V-0 Material for High-Performance Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Through Hole
High Durability Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Reliable Electrical Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount
Durable Type-C Connector with Stainless Steel Housing, Gold Plated Terminals, and 5000 Mating Cycles for Reliable Performance
USB-C (USB TYPE-C) Receptacle Connector 2 Position Through Hole
Robust Micro-B USB Connector with Gold Plated Contact, 10000 Connect-Disconnect Life, and LCP UL94V-0 Plastic for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Send RFQ
Stock:
MOQ:
