SHOU HAN TYPE-C 24P LTH10.0 connector with nickel plated SUS304 housing and gold plated copper contacts
Manufacturer:
SHOU HAN
Description:
24P SMD USB, DVI, HDMI Connector Adapters RoHS
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Adapters
Specifications
Number Of Contacts:
24P
Length:
10mm
Mounting Type:
立贴
Connector Type:
Type-C
Gender:
母
Number Of Ports:
1
Connect-Disconnect Life:
1万次
Mfr. Part #:
TYPE-C 24P LTH10.0
Package:
SMD
Model Number:
TYPE-C 24P LTH10.0
Introduction
Product Overview
The TYPE-C 24P LTH10.0 connector from Shenzhen Shouhan Technology Co., Ltd. is designed for reliable data and power transmission. It features a robust construction with high-conductivity copper terminals plated with gold for optimal contact and solderability. This connector is built to withstand demanding environmental conditions, including high temperatures and humidity, making it suitable for various industrial and electronic applications. The product undergoes rigorous testing to ensure its durability, electrical performance, and mechanical integrity.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Model: TYPE-C 24P LTH10.0
- Material - Core: High conductivity copper
- Material - Terminal: High conductivity copper, Nickel base, Gold plating (AU 1u") on contact area, Gold plating (G/F) on solder area
- Material - Housing: SUS304, Nickel plated surface
- Material - Mid-clip: SUS301
Technical Specifications
| Category | Item | Test Conditions | Performance/Specification |
|---|---|---|---|
| RATING | Rated Current | 5 A | |
| Contact Resistance (Initial) | Measured at small current (100mA or less) 1000Hz | 40m MAX | |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min (between body and conductor, between conductors not to be contact, between conductors not to be when plug is inserted) | 100M MIN | |
| MECHANICAL | Connection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 5~20 N |
| Disconnection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 8~20 N | |
| Terminal Strength | A static load of 0.1N/m (1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. | No damage, cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. | |
| Durability (Cycles) | Without load: 10,000 cycles at 10-25 cycles/min. With load (rating condition, non-inductive): 10,000 cycles at 10-20 cycles/min. | 10,000 Cycles | |
| ELECTRICAL | Contact Resistance (After Durability) | 0.1 | |
| Dielectric Strength | AC 100V rms (50~60Hz) for 1 min (between body and conductor, between conductors not to be contact, between conductors not to be when plug is inserted). Trip current: 0.5mA. | Without damage, arcing or breakdown etc. | |
| Disconnection Force (After Durability) | 0.8 TO 2.0 N | ||
| ENVIRONMENTAL | Solderability Test | Terminals dipped 1mm in solder bath (2505) for 50.5 seconds. | Solder wetting time 3 sec. Soldering area > 75%. |
| Resistance to Soldering Heat (Reflow) | Preheat: 180 (120s). Peak temp: 2605 (within 20 sec). | No deformation of case, excessive looseness of terminals. Electrical characteristics satisfied. | |
| Resistance to Soldering Heat (Iron) | Bit temp: 3305. Application time: 30.5 sec. | No deformation of case, excessive looseness of terminals. Electrical characteristics satisfied. | |
| Humidity Test | Stored at 402 and 90%-96% humidity for 96 Hr, then 1 Hr at standard atmospheric condition. | No appearance damage. Mechanical and electrical characteristics satisfied. | |
| Heat Test | Stored at 702 for 96 hours, then 1 Hr at room temperature. | Appearance and characteristics satisfied. | |
| Cold Test | Stored at -253 for 96 hours, then 1 Hr at room temperature. | Appearance and characteristics satisfied. | |
| TEMPERATURE CYCLING & SHOCK | Temperature Cycling Test | 5 cycles: 8 hours at 70, 8 hours at -20. Then 30 min at room ambient. | No deformation or cracks. Insertion/Extraction Force: 3-20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| Cold & Heat Shock Test | 5 cycles: 1 hour at 70, 1 hour at -20. Then 30 min at room ambient. | No deformation or cracks. Insertion/Extraction Force: 3-25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). | |
| Working Temperature Range | -30C ~ 80C | ||
| High Temperature Resistance (Reflow Peak) | 260 5 |
2507031705_SHOU-HAN-TYPE-C-24P-LTH10-0_C49287216.pdf
Send RFQ
Stock:
MOQ:
