High Durability SHOU HAN TYPE-C 16PFS LCH7.45 IPX8 Connector with IPX8 Protection and Connection Force
Manufacturer:
SHOU HAN
Description:
USB-C (USB TYPE-C) Receptacle Connector 16 Position Through Hole
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Number Of Ports:
1
Number Of Contacts:
16P
Mounting Type:
直插
Current Rating:
3A
Voltage Rating:
5V
Detection Color:
黑色
Operating Temperature:
-35℃~+85℃
Connector Type:
Type-C
Connect-Disconnect Life:
1万次
Gender:
母
Mfr. Part #:
TYPE-C 16PFS LCH7.45 IPX8
Package:
Through Hole
Model Number:
TYPE-C 16PFS LCH7.45 IPX8
Introduction
Product Overview
This document outlines the specifications for the TYPE-C 16PFS LCH7.45 IPX8 connector from Shenzhen Shouhan Technology Co., Ltd. It details the product's electrical, mechanical, and durability characteristics, designed for operation within a temperature range of -30~80C.
Product Attributes
- Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
- Origin: (Shenzhen)
- Model: TYPE-C 16PFS LCH7.45 IPX8
- IP Rating: IPX8
- Material Code: 3
- Approval Signatures: , ,
- Date: 2021.10.27
Technical Specifications
| Item | Test Conditions | Performance | Specification |
| RATING | |||
| DC20V | |||
| PRACTICAL TEMPERATURE RANGE | |||
| -30~80C | |||
| STANDARD ATMOSPHEIC CONDITIONS | |||
| (1) Temperature | 5C TO 35 | ||
| (2) Humidity | 45% TO 85% | ||
| (3) Pressure | 86Kpa TO 106Kpa | ||
| MECHANICAL | |||
| CONNECTION FORCE | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES. | 0.5-2.0Kgf | |
| DISCONNECTION FORCE | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES. | 0.8-2.0Kgf | |
| TERMINAL STRENGTH | A STATIC LOAD OF 0.1N/m(1kgf/cm)SHALL BE APPLIED TO THE TIP OF THE TERMINAL FOR 1 MIN IN ANY DIRECTION. THERE SHALL BE NO DAMAGE TO THE TERMINAL SUCH AS CRACKS, LOOSENESS OR PLAY. ELECTRICAL ,AND MECHANICAL CHARACTERISTICS SHALL BE SATISFIED. | ||
| ELECTRICAL | |||
| CONTACT RESISTANCE | MEASURED AT SMALL CURRENT (100m A OR LESS) 1000Hz | 40m MAX | |
| INSULATION RESISTANCE | APPLY A VOLTAGE OF 100V DC FOR 1 MIN TO FOLLOWING PORTIONS AFTER WHICH MEASUREMENT SHALL BE MADE: (1) BETWEEN BODY AND CONDUCTOR (2) BETWEEN CONDUCTORS NOT TO BE CONTACT (3) BETWEEN CONDUCTORS NOT TO BE WHEN PLUG IS INSERTED | 100M MIN | |
| DIELECTRIC STRENGTH | AC 100V ims(50~60Hz)FOR 1 MIN TRIP CURRENT:0.5mA (1) BETWEEN BODY AND CONDUCTOR (2) BETWEEN CONDUCTORS NOT TO BE CONTACL (3) BETWEEN CONDUCTORS NOT TO BE WHEN PLUG IS INSERTED | WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC | |
| DURABILITY | |||
| SOLDERABILITY TEST | THE TOP OF THE TERMINALS SHALL BE DIPPED 1mm IN THE SOLDER BATH OF 2505 FOR 50.5 SECONDS | (1) SOLDER WETTING TIME SHALL BE 3 SEC OR LESS (2) THE AREA OF SOLDERING SHOULD BE OVER 75% | |
| RESISTANCE TO SOLDERING HEAT TEST | REFLOW SOLDERING CONDITIONS: PREHEAT: 180.120s. TALLEST TEMPERATURE: 2605 WITHIN 20 SECONDS. | WITHOUT DEFORMATION OF CASE OR EXCESSIVE LOOSENESS OF TERMINALS. ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED. | |
| SOLDERING IRON METHOD: BIT TEMPERATURE 3305 APPLICATION TIME OF SOLDERING IRON 30.5 SEC. HOWEVER EXCESSIVE PRESSURE SHALL NOT BE APPLIED TO THE TERMINAL. | WITHOUT DEFORMATION OF CASE OR EXCESSIVE LOOSENESS OF TERMINALS. ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED. | ||
| HUMIDITY TEST | THE JACK SHALL BE STORED AT A TEMPERATURE OF 402 AND A HUMIDITY OF 90%TO 96% FOR 96 Hr, THEN THE JACK SHALL BE MAINTAINED AT STANDARD ATMOSPHERIC CONDITION FOR 1 Hr. | ||
| HEAT TEST | THE JACK SHALL BE STORED AT A TEMPERATURE OF 702 FOR 96 HOURS, AND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY. | THERE SHALL BE NO DAMAGE ON APPEARANCE. MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED. | |
| COLD TEST | THE JACK SHALL BE STORED AT A TEMPERATURE OF -253 FOR 96 HOURS AND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY CONDITIONS FOR 1 HOUR. | THERE SHALL BE NO DAMAGE ON APPEARANCE. MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED. | |
| LIFE TEST | WITHOUT LOAD: CONNECTION AND DISCONNECTION SHALL BE MADE WITH THE MATING PLUGS AND JACKS FOR 10000 CYCLES AT A SPEED OF 10 TO 25 CYCLES/MIN. | ||
| LOAD: AT RATING CONDITION (NON-INDUCTIVE LOAD). CONNECTION AND DISCONNECTION SHALL BE MADE 10000 CYCLES AT A SPEED 10 TO 20 CYCLES / MIN. | (1) CONTACT RESISTANCE SHALL BE 0.1 (2) DISCONNECTION FORCE SHALL BE 0.8 TO 2.0N (3) MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED. | ||
| TEMPERATURE CYCLING TEST | THE JACK SHALL BE SUBJECTED TO 5 CYCLES OF THE FOLLOWING CONDITIONS: 70 FOR 0.5 HOURS, 40 FOR 0.5 HOURS, 0 FOR 0.5 HOURS, -40 FOR 8 HOURS. THEN RETURNED TO ROOM AMBIENT FOR 30 MINUTES. | THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. INSERTION & EXTRACTION FORCE: 3 TO 20N. CONTACT RESISTANCE: MAX.30M. INSULATION RESISTANCE: MIN.100 M. DIELECTRIC WITHSTANDING VOLTAGE: 100VAC/MIN (BETWEEN TERMINALS). | |
| COLD&HEAT SHOCK TEST | THE JACK SHALL BE SUBJECTED TO 5 CYCLES OF THE FOLLOWING CONDITIONS: 70 FOR 1 HOUR, -20 FOR 1 HOUR. THEN RETURNED TO ROOM AMBIENT FOR 30 MINUTES. | THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. INSERTION & EXTRACTION FORCE: 3 TO 25N. CONTACT RESISTANCE: MAX.30M. INSULATION RESISTANCE: MIN.100 M. DIELECTRIC WITHSTANDING VOLTAGE: 500VAC/MIN (BETWEEN TERMINALS). | |
2507171700_SHOU-HAN-TYPE-C-16PFS-LCH7-45-IPX8_C3020054.pdf
Related Products
Micro USB Connector with 3000 Connect-Disconnect Life, Gold Plated Contacts, and Nickel Plated Shell for High Durability
USB-Micro B Receptacle Connector 5 Position Recessed Mount
IPX8 Waterproof USB Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Durable Performance
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle
IPX8 Waterproof Type-C Connector with 6P Contacts and 3A Current Rating for Harsh Environments
USB-C (USB TYPE-C) Receptacle Connector 6 Position Recessed Mount
Durable USB Connector Type-A with DC 30V 1.5A Rating 5000 Connect-Disconnect Life and -25℃~+85℃ Operating Temperature
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
SHOU HAN MICRO 6.4ZB5.0 Micro-B Connector with 5P Contacts, 1A Current Rating, and 3000 Connect-Disconnect Life for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Mini-B USB Connector with 10P Contacts, 5000 Connect-Disconnect Life, and 30V 1A Rating for Reliable Electronic Devices
USB-Mini B Receptacle Connector 10 Position Surface Mount, Right Angle
Durable Type-C 6P Connector with 5000 Mating Cycles, 3A Current Rating, and LCP UL94 V-0 Material for High-Performance Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Through Hole
High Durability Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Reliable Electrical Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount
Durable Type-C Connector with Stainless Steel Housing, Gold Plated Terminals, and 5000 Mating Cycles for Reliable Performance
USB-C (USB TYPE-C) Receptacle Connector 2 Position Through Hole
Robust Micro-B USB Connector with Gold Plated Contact, 10000 Connect-Disconnect Life, and LCP UL94V-0 Plastic for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Send RFQ
Stock:
MOQ:
