Industrial SHOU HAN 10.0 QTJ6.3 rated electrical part suitable for under standard atmospheric pressure
Manufacturer:
SHOU HAN
Description:
USB-A (USB TYPE-A) Receptacle Connector 4 Position Surface Mount, Right Angle
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Length:
10mm
Number Of Ports:
1
Supplementary Features:
-
Number Of Contacts:
4P
Mounting Type:
卧贴
Center Height:
-
Current Rating:
1.5A
Detection Color:
黑色
Voltage Rating:
30V
Operating Temperature:
-25℃~+85℃
Connector Type:
Type-A
Connect-Disconnect Life:
5千次
Gender:
母
Mfr. Part #:
10.0 QTJ6.3
Package:
SMD
Model Number:
10.0 QTJ6.3
Introduction
Product Overview
This document outlines the specifications for the USB 10.0 QTJ6.3, a product from (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD). It details the product's technical performance, including electrical, mechanical, and durability characteristics, designed for operation within a specific temperature range and under standard atmospheric conditions.
Product Attributes
- Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
- Origin: (Shenzhen)
- Contact Person (Drawn): (Li Chunfeng)
- Contact Person (Checked): (Luo Xiaojin)
- Contact Person (Approved): (Zhong Huahua)
- Contact Number: 0755-27597601
- Fax: 0755-27597491
Technical Specifications
| Item | Test Conditions | Performance/Specification |
| RATING | ||
| Rated Value | DC 30V 1.5A | |
| Operating Temperature Range | -25~85C | Within -25C~+85C |
| STANDARD ATMOSPHERIC CONDITIONS | ||
| Temperature | 5C to 35 | |
| Humidity | 45% to 85% | |
| Pressure | 86Kpa to 106Kpa | |
| MECHANICAL | ||
| Connection Force | After connecting and disconnecting using standard plug gauge 3 times | 3.57Kgf MAX |
| Disconnection Force | After connecting and disconnecting using standard plug gauge 3 times | 1.02Kgf MIN |
| Terminal Strength | Static load of 0.1N/m (1kgf/cm) applied to the tip of the terminal for 1 min in any direction | No damage to terminal (cracks, looseness, play); satisfied electrical and mechanical characteristics. |
| ELECTRICAL | ||
| Contact Resistance | Measured at small current (100mA or less) at 1000Hz | 30m MAX |
| Insulation Resistance | Apply 100V DC for 1 min between specified portions | 1000M MIN |
| Dielectric Strength | AC 500V rms (50~60Hz) for 1 min, trip current: 0.5mA, between specified portions | No damage, arcing, or breakdown |
| DURABILITY | ||
| Solderability Test | Terminals dipped 1mm in solder bath at 2505 for 50.5 seconds | (1) Solder wetting time 3 sec; (2) Soldering area > 75% |
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180 for 120s; Peak temp: 2605 within 20 seconds | No deformation of case or excessive looseness of terminals; satisfied electrical characteristics. |
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305, application time 30.5 sec. No excessive pressure on terminals. | No deformation of case or excessive looseness of terminals; satisfied electrical characteristics. |
| Humidity Test | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | |
| Heat Test | Stored at 702 for 96 Hours, then subjected to controlled recovery for 1 Hr. | No damage on appearance; satisfied mechanical and electrical characteristics. |
| Cold Test | Stored at -253 for 96 Hours, then subjected to controlled recovery for 1 Hr. | No damage on appearance; satisfied mechanical and electrical characteristics. |
| Life Test (Without Load) | Connection and disconnection 5000 cycles at 10 to 25 cycles/min. | (1) Contact Resistance 0.1; (2) Disconnection Force 0.8 to 2.0N; (3) Satisfied mechanical and electrical characteristics. |
| Life Test (With Load) | Connection and disconnection 5000 cycles at 10 to 20 cycles/min at rating condition (non-inductive load). | (1) Contact Resistance 0.1; (2) Disconnection Force 0.8 to 2.0N; (3) Satisfied mechanical and electrical characteristics. |
| Temperature Cycling Test | Subjected to 5 cycles of specified conditions (shown in figure), then returned to room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| Cold & Heat Shock Test | Subjected to 5 cycles of specified conditions (shown in figure), then returned to room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
2411251528_SHOU-HAN-10-0-QTJ6-3_C404966.pdf
Related Products
Micro USB Connector with 3000 Connect-Disconnect Life, Gold Plated Contacts, and Nickel Plated Shell for High Durability
USB-Micro B Receptacle Connector 5 Position Recessed Mount
IPX8 Waterproof USB Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Durable Performance
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle
IPX8 Waterproof Type-C Connector with 6P Contacts and 3A Current Rating for Harsh Environments
USB-C (USB TYPE-C) Receptacle Connector 6 Position Recessed Mount
Durable USB Connector Type-A with DC 30V 1.5A Rating 5000 Connect-Disconnect Life and -25℃~+85℃ Operating Temperature
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
SHOU HAN MICRO 6.4ZB5.0 Micro-B Connector with 5P Contacts, 1A Current Rating, and 3000 Connect-Disconnect Life for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Mini-B USB Connector with 10P Contacts, 5000 Connect-Disconnect Life, and 30V 1A Rating for Reliable Electronic Devices
USB-Mini B Receptacle Connector 10 Position Surface Mount, Right Angle
Durable Type-C 6P Connector with 5000 Mating Cycles, 3A Current Rating, and LCP UL94 V-0 Material for High-Performance Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Through Hole
High Durability Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Reliable Electrical Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount
Durable Type-C Connector with Stainless Steel Housing, Gold Plated Terminals, and 5000 Mating Cycles for Reliable Performance
USB-C (USB TYPE-C) Receptacle Connector 2 Position Through Hole
Robust Micro-B USB Connector with Gold Plated Contact, 10000 Connect-Disconnect Life, and LCP UL94V-0 Plastic for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Send RFQ
Stock:
MOQ:
