Connector SHOU HAN TYPE-C 16PLC-H10.0 engineered for long-term mechanical and electrical durability
Manufacturer:
SHOU HAN
Description:
USB-C (USB TYPE-C) Receptacle Connector 16 Position Through Hole
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Number Of Ports:
1
Number Of Contacts:
16P
Mounting Type:
直插
Current Rating:
5A
Voltage Rating:
20V
Detection Color:
黑色
Operating Temperature:
-40℃~+85℃
Connector Type:
Type-C
Connect-Disconnect Life:
1万次
Gender:
母
Mfr. Part #:
TYPE-C 16PLC-H10.0
Package:
Through Hole
Model Number:
TYPE-C 16PLC-H10.0
Introduction
Product Overview
This document outlines the specifications for the TYPE-C 16PLC-H10.0 connector from Shenzhen Shouhan Technology Co., Ltd. It details the product's mechanical, electrical, and durability characteristics, along with testing conditions and performance requirements.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Model: TYPE-C 16PLC-H10.0
- Part Number: 16PLC-H10.0
- Material Code: PRACTICAL
Technical Specifications
| Item | Test Conditions | Performance | |||
| Mechanical | Connection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | PLUG GAUGE 3 | 0.5-2.0Kgf | |
| Disconnecti on Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | PLUG GAUGE 3 | 0.8-2.0Kgf | ||
| Terminal Strength | A static load of 0.1N/m(1kgf/cm)shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. | 1 0.1N/m(1kgf/cm). | |||
| Electrical | Contact Resistance | Measured at small current (100mA or less) 1000Hz | 100 m A | 40m MAX | |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100V DC 1 1 2 3 | 100M MIN | ||
| Dielectric Strength | AC 100V ims(50~60Hz)for 1 min Trip Current:0.5mA (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | AC 100V 50Hz/min 1 0.5mA, : (1) (2) (3) | Without damage to parts arcing or breakdown etc | ||
| Durability | Solder- Ability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. (1) Solder wetting time shall be 3 sec or less (2) The area of soldering should be over 75% | 1mm ,2505,5 0.5 13 275% | ||
| Resistance to Soldering Heat Test (Reflow Soldering) | Preheat: Temperature on the copper foil surface should reach 180.120s after the P.C.B entered into the soldering equipment. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 with in 20 seconds. | :180,120s :260520 | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | ||
| Resistance to Soldering Heat Test (Soldering Iron Method) | Bit temperature 3305 Application time of soldering iron 30.5 sec However excessive pressure shall not be applied to the terminal. | 3305 30.5 | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | ||
| Humidity Test | The jack shall be stored at a temperature of 402 and a humidity of 90%to 96% for 96 Hr,then the jack shall be maintained at standard atmospheric condition for 1 Hr for other procedures. | 402 90~96% Hr 96 1 | |||
| Heat Test | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to the controlled recovery measurement. | 70296 1 | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | ||
| Cold Test | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour after which. | -25396 1 | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | ||
| Life Test (Without Load) | Connection and disconnection shall be made with the mating plugs and jacks for 5000 cycles at a speed of 10 to 25 cycles/min. | Plug()1 10-255000 | (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. | ||
| Life Test (Load) | At rating condition (non-inductive load) connection and disconnection shall be made 5000 cycles at a speed 10 to 20 cycles / min. | ()1 10-205000 | (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. | ||
| Temperature Cycling Test | The jack shall be subjected to 5 cycles of the following conditions, and then shall return to room ambient condition for 30 minutes. | 5 30 | Product cannot deform or crack. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | ||
| Cold & Heat Shock Test | The jack shall be subjected to 5 cycles of the following conditions, and then shall return to room ambient condition for 30 minutes. | 5 30 | Product cannot deform or crack. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
2512311411_SHOU-HAN-TYPE-C-16PLC-H10-0_C3151747.pdf
Related Products
Micro USB Connector with 3000 Connect-Disconnect Life, Gold Plated Contacts, and Nickel Plated Shell for High Durability
USB-Micro B Receptacle Connector 5 Position Recessed Mount
IPX8 Waterproof USB Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Durable Performance
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle
IPX8 Waterproof Type-C Connector with 6P Contacts and 3A Current Rating for Harsh Environments
USB-C (USB TYPE-C) Receptacle Connector 6 Position Recessed Mount
Durable USB Connector Type-A with DC 30V 1.5A Rating 5000 Connect-Disconnect Life and -25℃~+85℃ Operating Temperature
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
SHOU HAN MICRO 6.4ZB5.0 Micro-B Connector with 5P Contacts, 1A Current Rating, and 3000 Connect-Disconnect Life for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Mini-B USB Connector with 10P Contacts, 5000 Connect-Disconnect Life, and 30V 1A Rating for Reliable Electronic Devices
USB-Mini B Receptacle Connector 10 Position Surface Mount, Right Angle
Durable Type-C 6P Connector with 5000 Mating Cycles, 3A Current Rating, and LCP UL94 V-0 Material for High-Performance Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Through Hole
High Durability Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Reliable Electrical Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount
Durable Type-C Connector with Stainless Steel Housing, Gold Plated Terminals, and 5000 Mating Cycles for Reliable Performance
USB-C (USB TYPE-C) Receptacle Connector 2 Position Through Hole
Robust Micro-B USB Connector with Gold Plated Contact, 10000 Connect-Disconnect Life, and LCP UL94V-0 Plastic for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Send RFQ
Stock:
MOQ:
