Durable SHOU HAN TYPE-C 16P 3MD-2.0 connector rated 20V 2A suitable for temperature range minus 30C to 80C
Manufacturer:
SHOU HAN
Description:
16P SMD USB, DVI, HDMI Connector Adapters RoHS
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Adapters
Specifications
Number Of Contacts:
16P
Length:
7.35mm
Mounting Type:
卧贴
Connector Type:
Type-C
Voltage Rating:
20V
Gender:
母
Number Of Ports:
1
Connect-Disconnect Life:
1万次
Mfr. Part #:
TYPE-C 16P 3MD-2.0
Package:
SMD
Model Number:
TYPE-C 16P 3MD-2.0
Introduction
Product Overview
This document details the specifications for a TYPE-C connector, specifically the 16P 3MD-2.0 model. It outlines the product's electrical, mechanical, and durability characteristics, designed for various applications requiring reliable Type-C connectivity. The specifications cover performance under standard atmospheric conditions, temperature ranges, and include detailed testing procedures for contact resistance, insulation resistance, dielectric strength, solderability, and resistance to soldering heat. It also addresses performance under humidity, heat, cold, and life cycle testing, ensuring robust functionality and longevity.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Name: TYPE-C
- Part Number: TYPE-C 16P 3MD-2.0
- Material Code: TYPE-C 16P 3MD-2.0
Technical Specifications
| Category | Item | Test Conditions | Performance / Specification |
|---|---|---|---|
| RATING () | Rating | Standard Atmospheric Conditions | 20V 2A |
| Practical Temperature Range | Within -30C~80C | -30C~80C | |
| Standard Atmospheric Conditions for Measurement | Temperature: 5C to 35 Humidity: 45% to 85% Pressure: 86Kpa to 106Kpa | N/A | |
| MECHANICAL () | Connection Force | After connecting and disconnecting using standard plug gauge 3 times | 0.5~2.0 Kgf |
| Disconnect Force | After connecting and disconnecting using standard plug gauge 3 times | 0.8~2.0 Kgf | |
| MECHANICAL () | Terminal Strength | Static load of 0.1N/m (1kgf/cm) applied to the tip of the terminal for 1 min in any direction. No damage to terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. | N/A |
| ELECTRICAL () | Contact Resistance | Measured at small current (100mA or less) at 1000Hz | 50m MAX |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to specified portions. | 100M MIN | |
| Dielectric Strength | AC 100V rms (50~60Hz) for 1 min, trip current: 0.5mA. No damage to parts, arcing or breakdown etc. | N/A | |
| DURABILITY () | Solderability Test | Terminals dipped 1mm in solder bath at 2505 for 50.5 seconds. | Solder wetting time: 3 sec Soldering area: 75% |
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180 for 120s. Peak temperature: 2605 within 20 seconds. No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | N/A | |
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305, application time 30.5 sec. No excessive pressure on terminal. No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | N/A | |
| Humidity Test | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | N/A | |
| Heat Test | Stored at 702 for 96 hours, then subjected to controlled recovery conditions for 1 hour. No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | N/A | |
| Cold Test | Stored at -253 for 96 hours, then subjected to controlled recovery conditions for 1 hour. No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | N/A | |
| Life Test (Without Load) | Connection and disconnection for 10000 cycles at a speed of 10 to 25 cycles/min. | N/A | |
| Life Test (With Load) | Connection and disconnection for 10000 cycles at a speed of 10 to 20 cycles/min under rating condition (non-inductive load). | Contact Resistance: 0.1 Disconnection Force: 0.8 to 2.0N Other: Mechanical and electrical characteristics shall be satisfied. | |
| Temperature Cycling Test | 5 cycles of specified temperature conditions (e.g., 8 hours at 70, then -20). No deformation or cracks in molded part. | Insertion & Extraction Force: 3 to 20N Contact Resistance: Max. 30m Insulation Resistance: Min. 100 M Dielectric Withstanding Voltage: 100VAC/min (between terminals) | |
| Cold & Heat Shock Test | 5 cycles of specified temperature conditions (e.g., 1 hour at 70, then -20). No deformation or cracks in molded part. | Insertion & Extraction Force: 3 to 25N Contact Resistance: Max. 30m Insulation Resistance: Min. 100 M Dielectric Withstanding Voltage: 500VAC/min (between terminals) |
2507031705_SHOU-HAN-TYPE-C-16P-3MD-2-0_C49287212.pdf
Send RFQ
Stock:
MOQ:
