SHOU HAN 10.0 QHHTZB6.3 connector providing high terminal strength and contact resistance for professional
Manufacturer:
SHOU HAN
Description:
USB-A (USB TYPE-A) Receptacle Connector 4 Position Surface Mount, Right Angle
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Length:
10mm
Number Of Ports:
1
Supplementary Features:
-
Number Of Contacts:
4P
Mounting Type:
卧贴
Center Height:
-
Current Rating:
1.5A
Detection Color:
黑色
Voltage Rating:
30V
Operating Temperature:
-25℃~+85℃
Connector Type:
Type-A
Connect-Disconnect Life:
5千次
Gender:
母
Mfr. Part #:
10.0 QHHTZB6.3
Package:
SMD
Model Number:
10.0 QHHTZB6.3
Introduction
Product Overview
This specification document outlines the technical details and performance standards for a connector product from SHENZHEN SHOUHAN TECHNOLOGY CO., LTD. It details the product's practical temperature range, standard atmospheric conditions for testing, and various performance metrics including connection/disconnection force, terminal strength, contact resistance, insulation resistance, dielectric strength, and durability under various environmental and operational stresses. The product is designed for applications requiring reliable electrical and mechanical performance within a specified temperature range.
Product Attributes
- Brand: SHOUHAN
- Origin: Shenzhen, China
- Model (Customer): QHHTZB6.3
- Model (Manufacturer): 10.06.3
- Rating: DC 30V 1.5A
Technical Specifications
| Item | Test Conditions | Performance | |||
| 1 | Connection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | PLUG GAUGE 3 | 3.57Kgf | |
| 2 | Disconnection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | PLUG GAUGE 3 | 1.02Kgf | |
| 3 | Terminal Strength | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. | 1 0.1N/m(1kgf/cm). | ||
| 3.1 | Contact Resistance | Measured at small current (100mA or less) 1000Hz | 100 m A | 30m | |
| 3.2 | Insulation Resistance | Apply a voltage of 100V DC for 1 min to following portions: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100V DC 1 1 2 3 | 1000M | |
| 3.3 | Dielectric Strength | AC 500V rms(50~60Hz) for 1 min. Trip current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | AC 500V 50Hz/min 1 0.5mA, : (1) (2) (3) | Without damage to parts arcing or breakdown etc. | |
| 4.1 | Solderability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. (1) Solder wetting time shall be 3 sec or less (2) The area of soldering should be over 75% | 1mm ,2505, 50.5 13 275% | ||
| 4.2 | Resistance to Soldering Heat Test (Reflow) | Reflow soldering conditions: Preheat: Temperature on the copper foil surface should reach 180. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 within 20 seconds. | :180. :260520 | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| 4.2 | Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305. Application time of soldering iron 30.5 sec. However, excessive pressure shall not be applied to the terminal. | 3305 30.5 | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| 4.3 | Humidity Test | The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | 402 90~96% Hr 96 1 | ||
| 4.4 | Heat Test | The jack shall be stored at a temperature of 702 for 96 hours, then subjected to controlled recovery for 1 hour. | 70296 1 | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| 4.5 | Cold Test | The jack shall be stored at a temperature of -253 for 96 hours and then subjected to controlled recovery for 1 hour. | -25396 1 | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| 4.6 | Life Test (Without Load) | Connection and disconnection shall be made with mating plugs and jacks for 5000 cycles at a speed of 10 to 25 cycles/min. | Plug() 1 10~25 5000 | ||
| 4.6 | Life Test (Load) | At rating condition (non-inductive load). Connection and disconnection shall be made 5,000 cycles at a speed 10 to 20 cycles / min. (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 7N (3) Mechanical and electrical characteristics shall be satisfied. | ()1 10~20 5000 (1) 0.1 (2) 7N (3) :, | ||
| 4.7 | Temperature Cycling Test | The jack shall be subjected to 5 cycles of specified conditions, then allowed to remain in room ambient condition for 30 minutes. There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | 5 30 . . 3N 20N. 30m. 100 M. 100VAC. | ||
| 4.8 | Cold & Heat Shock Test | The jack shall be subjected to 5 cycles of specified conditions, then allowed to remain in room ambient condition for 30 minutes. There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). | 5 30 . . 3N 25N. 30m. 100 M. 500VAC. |
2006181822_SHOU-HAN-10-0-QHHTZB6-3_C668591.pdf
Related Products
Micro USB Connector with 3000 Connect-Disconnect Life, Gold Plated Contacts, and Nickel Plated Shell for High Durability
USB-Micro B Receptacle Connector 5 Position Recessed Mount
IPX8 Waterproof USB Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Durable Performance
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle
IPX8 Waterproof Type-C Connector with 6P Contacts and 3A Current Rating for Harsh Environments
USB-C (USB TYPE-C) Receptacle Connector 6 Position Recessed Mount
Durable USB Connector Type-A with DC 30V 1.5A Rating 5000 Connect-Disconnect Life and -25℃~+85℃ Operating Temperature
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
SHOU HAN MICRO 6.4ZB5.0 Micro-B Connector with 5P Contacts, 1A Current Rating, and 3000 Connect-Disconnect Life for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Mini-B USB Connector with 10P Contacts, 5000 Connect-Disconnect Life, and 30V 1A Rating for Reliable Electronic Devices
USB-Mini B Receptacle Connector 10 Position Surface Mount, Right Angle
Durable Type-C 6P Connector with 5000 Mating Cycles, 3A Current Rating, and LCP UL94 V-0 Material for High-Performance Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Through Hole
High Durability Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Reliable Electrical Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount
Durable Type-C Connector with Stainless Steel Housing, Gold Plated Terminals, and 5000 Mating Cycles for Reliable Performance
USB-C (USB TYPE-C) Receptacle Connector 2 Position Through Hole
Robust Micro-B USB Connector with Gold Plated Contact, 10000 Connect-Disconnect Life, and LCP UL94V-0 Plastic for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Send RFQ
Stock:
MOQ:
