Durable electronic connector SHOU HAN AM90 offering stable current and voltage ratings for industrial
Manufacturer:
SHOU HAN
Description:
USB-A (USB TYPE-A) Receptacle Connector 4 Position Right Angle
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Length:
18.8mm
Number Of Ports:
1
Supplementary Features:
-
Number Of Contacts:
4P
Mounting Type:
弯插
Center Height:
-
Current Rating:
1.5A
Detection Color:
白色
Voltage Rating:
30V
Operating Temperature:
-25℃~+85℃
Connector Type:
Type-A
Connect-Disconnect Life:
5千次
Gender:
公
Mfr. Part #:
AM90
Package:
Through Hole,Right Angle
Model Number:
AM90
Introduction
Product Overview
This product is a connector designed for various electronic applications. It offers reliable electrical and mechanical performance, including specific current and voltage ratings, contact resistance, and durability under various environmental and operational conditions. Suitable for use in a wide temperature range, it is manufactured with high-quality materials and plating for optimal performance and longevity.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Housing Material: High Temperature Thermoplastics, UL 94V-0 PBT/LCP
- Contact Material: Copper Alloy C2680
- Shell Material: Copper Alloy C2680/SPCC
- Housing Color: White/Black
- Contact Plating: Gold in Mating Area; Tin On Solder Tails
- Shell Plating: Nickel Plating
Technical Specifications
| ITEM | TEST CONDITIONS | PERFORMANCE | SPECIFICATION |
|---|---|---|---|
| Electrical Characteristics | Current Rating | 1.5A/contact terminal | |
| Voltage Rating | 30V DC | ||
| Contact Resistance | Measured at small current (100mA or less) 1000Hz | 30m MAX | |
| Dielectric Withstanding Voltage | AC 500V rms (50~60Hz) for 1 min; Trip Current: 0.5mA (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | ||
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 1000M MIN | |
| Mechanical Characteristics | Connector Mate and Unmate Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | Mate force: 3.75Kgf MAX Unmate force: 1.02Kgf MIN |
| Terminal Retention | A static load of 0.1N/m (1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. | 1.2kgf (MIN) | |
| Durability | (1) Without Load: Connection and disconnection shall be made with the mating plugs and jacks for 3000 cycles at a speed of 10 to 25 cycles/min (2) Load: At rating condition (non-inductive load) connection and disconnection shall be made 3000 cycles at a speed 10 to 20 cycles / min | (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied | |
| Environmental Tests | Humidity Test | The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr for other procedures. There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| Heat Test | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to the controlled recovery measurement. | ||
| Cold Test | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour after which. There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | ||
| Temperature Cycling Test | The jack shall be subjected to 5 cycles of the following conditions, and then shall returned allowed to remain in room ambient condition for 30 minutes. There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | ||
| Soldering Conditions | Overpeak Welding Conditions | Preheat: Temperature on the copper foil without deformation of case or excessive looseness of terminals. Surface should reach 180. 120s after the P.C.B entered into the soldering equipment. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2305 within 20 seconds. Electrical characteristics shall be satisfied. | |
| Resistance to Soldering Heat Test | Soldering iron method: Bit temperature 3305. Application time of soldering iron 30.5 sec. However excessive pressure shall not be applied to the terminal. Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
2506051505_SHOU-HAN-AM90_C404965.pdf
Related Products
Micro USB Connector with 3000 Connect-Disconnect Life, Gold Plated Contacts, and Nickel Plated Shell for High Durability
USB-Micro B Receptacle Connector 5 Position Recessed Mount
IPX8 Waterproof USB Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Durable Performance
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle
IPX8 Waterproof Type-C Connector with 6P Contacts and 3A Current Rating for Harsh Environments
USB-C (USB TYPE-C) Receptacle Connector 6 Position Recessed Mount
Durable USB Connector Type-A with DC 30V 1.5A Rating 5000 Connect-Disconnect Life and -25℃~+85℃ Operating Temperature
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
SHOU HAN MICRO 6.4ZB5.0 Micro-B Connector with 5P Contacts, 1A Current Rating, and 3000 Connect-Disconnect Life for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Mini-B USB Connector with 10P Contacts, 5000 Connect-Disconnect Life, and 30V 1A Rating for Reliable Electronic Devices
USB-Mini B Receptacle Connector 10 Position Surface Mount, Right Angle
Durable Type-C 6P Connector with 5000 Mating Cycles, 3A Current Rating, and LCP UL94 V-0 Material for High-Performance Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Through Hole
High Durability Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Reliable Electrical Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount
Durable Type-C Connector with Stainless Steel Housing, Gold Plated Terminals, and 5000 Mating Cycles for Reliable Performance
USB-C (USB TYPE-C) Receptacle Connector 2 Position Through Hole
Robust Micro-B USB Connector with Gold Plated Contact, 10000 Connect-Disconnect Life, and LCP UL94V-0 Plastic for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Send RFQ
Stock:
MOQ:
